HIOKI PHASE DETECTOR PD3129-10, Phase Rotation Meter with Easy-to-Read Arrow and Non-Metallic Contact Clips for 70 V to 1000 V Lines

USD $210.43 USD $234.78

0 reviews

Brand:
HIOKI
Product Code:
HIOKI_PD3129-10
Availability:
In Stock

Model PD3129-10 is a non-contact phase rotation meter that detects the phase of electrical current flow within insulated wires without using metallic contact voltage clips. The green arrow indicates normal phase, which can be useful for visual reports that document the proper completion of electrical work.

- Simply clip clamps onto wire insulation
- Green LED arrow clearly shows phase direction, perfect for visual reports
- [CAT III] 1000V
- Rotating LED indicator shows the phase sequence for a 3-phase power supply at a glance
- Intermittent beeps signal positive phase; continuous tone signals reverse phase
- Magnetic base allows the instrument to be secured on a distribution panel




Functions
Phase detection (positive and negative)
Voltage detection method
Static induction
Voltage range
70 to 1000 V AC (50/60 Hz) (sine wave, continuous input)
Frequency range
45 Hz to 66 Hz
Object to be connected
7 mm (0.28 in) to 40 mm (1.57 in) of insulated wiring
Display
Positive ; 4 LEDs lit in clockwise order and the buzzer sounds intermittently, green arrow lights up / Negative ; 4 LEDs lit in counterclockwise order and the buzzer sounds continuously
Battery check function
Power ON lamp: lights up (Power ON), blinks (Battery LOW)
Auto power off
Auto shut off if no activity is detected after power is turned ON for 15 minutes
Power supply
R6P (AA) manganese battery ×2, Continuous use: 70 hr
Dimensions and mass

70 mm (2.76 in)W × 75 mm (2.95 in)H × 30 mm (1.18 in)D, 240 g (8.5 oz), Cord length : 0.7 m (2.30 ft)

- Included accessories: Carrying case ×1, Strap ×1, Spiral tube ×1, Instruction manual ×1, R6P (AA) manganese battery ×2

There are no reviews for this product.