- Suitable for chip component repair, and the air volume switching switch allows work to be done with very fine wind.- Composition: main body, soldering iron, nozzle (inner diameter 02mm: No.A1066), soldering iron holder (B1190), nozzle holder (B1212)..

Soldering as well as solder removal and SMD REWORK are possible with the latest multi-function stataion.- Combining 3 soldering irons, FX-889 soldering iron, FR-410 soldering iron, and hot air F-810B into one unit. One soldering iron of L type FX-8805 is attached.- Toolbox provided C5030: FH410-81 for cleaning pin nozzle Ø1.0mm, cleaning pin heater..

Multi-function in one product (soldering, desoldering, SMD rework)- Compatible with various soldering irons. Adoption of large LCD panel. Graphic LCD Play- Simple operation method. N2 system compatible products- Detailed work possible by direct heat application- FR-206 main body, power plug, tip holder, FM-2027 set, FM-2024 set, FM-2029 set..

Simple profile work is possible with the preset linkage function.- You can easily set the pre-registered temperature setting. (Available for up to 5 units) Efficiency can be increased by saving work time.- Equipped with a vacuum pick-up function as standard, increasing work time and efficiency.- Safety: Reinforced safety features by incorporating a..

- This is a high-specification product with excellent price-performance ratio and allows rework using hot air.- Equipped with a profile function that allows work in conditions close to reflow- A control panel that allows you to set even complex settings intuitively, allowing you to connect to a PC and measure, record, and modify the temperature of ..

- Composition: FA-430 main body, A1573 main filter, A1572 pre-filter, power cable- Ultra-low sound (Low: 44dB) design using silence structure method- Long life with brushless motor- Three suction modes available to suit the situation- Flexible duct does not require separate fixing device- Collection efficiency of 98%, excellent purification ability..

- Composition: FA-431 main body, main filter, pre-filter, remote control, power cable- Ultra-low sound (Low: 44dB) design using silence structure method- Long life with brushless motor- Three suction modes available to suit the situation- Flexible duct does not require separate fixing device- Collection efficiency of 98%, excellent purification abi..

..

- Select the heat supply pattern according to the type of lead: can be used in optimal conditions by setting parameters- You can select four patterns of heat supply settings: Sn-Pb (tin - lead), Sn-Ag-Cu (tin, silver, copper), Sn-Cu (tin, copper), and Sn (tin).- Accurate temperature management is possible: digital display allows setting in 1℃ incre..

- Optimized for dipping work on small parts- Lead tank (50), 100~450 degrees Celsius..

- Optimized for dipping work on small parts- Lead tank (70), 100~380 degrees Celsius..

- Components: FX-305 main body, B5322 lead tank cover, B2919 oxide collection stand, B2932 spatula, B1416 hex wrench (2mm), B2419 power cord, B5129 USB communication cable- High output reduces work preparation time by 60%. Temperature compensation function and maximum temperature of 530 degrees allow work on high-temperature, high-heat products (50..

..

..

..

This adapter connects the HAKKO C1571 and C1572 duct (B3642) to the Hakko FA-430 fume extraction unit...

..

- Length: 400mm, 300mm..

10 pack of pre-filters for the FA-430 Fume Extraction System. Use with the A1573 main HEPA filter. Note: Please note that the filters we use in our fume extraction systems are designed for removing particulate and byproducts from the soldering process ONLY. The filter media is not designed to be used as any type of respiratory mask or componen..

- Pleated filter captures 99.97% of particles 0.3µm in size.- Main HEPA filter for the FA-430 Fume Extraction System. For use with A1572 pre-filters...

- Clear bench top hood for the FA-430 Smoke and Fume Extraction System. - The following products are required to use the hood with the FA-430: B2410 neoprene duct, B2416 clamp, and the B3621 adapter...

..

..

- C5030 Maintenance Kit Includes:: B1087 - 1.0mm Cleaning Pin, B1215 - Heater Cleaning Pin, B1303 - 1.0mm Cleaning Drill, B5106 - Nozzle Wrench, A5020 - Station Filter (x2), A5044 - Handpiece Filter (x4)..

- The Hakko C1392B rework fixture is designed for use with the Hakko 850, 852, 702, FR-801, FR-802, FR-803, FR-803B, FR-810 and FR-810B hot air rework systems. It can be used alone or together with the Hakko 853 preheater and C1390 Omnivise board holders.- Smooth lever action- Adjustable stop to prevent unnecessary pressure applied to the board and..