[Daekyung Tech] Medium-sized high-speed cutting machineQuote Contact_ cs@roasexpo.comIt cuts at high speed for quick and simple cutting of medium-sized commercial plates.Sample size: 85 X 85 mm or Ø 95 mmWheel Speed: 300~3600 RPMWheel size: Ø 250 ~ 305 mmSince the lower part is made of a single cast, there is no case of leakage of lubricant and no..

[Daekyung Tech] Medium-to-large high-speed cutting machineQuote Contact_ cs@roasexpo.comIt is manufactured to cut medium-sized specimens precisely and automatically.Cutting size: 160 X 145 or Ø 154Speed ​​(RPM): 1000 ~ 4000 rpmWheel size: Ø 400 mmAuto/Manual : Orderer's specificationIt can be produced with automatic table movement or manual handle..

[Daekyung Tech] High-speed precision cutting machineQuote Contact_ cs@roasexpo.comHigh-speed automatic cutting with a diamond wheel so that medium-sized specimens can be cut precisely.CAPACITY : (60 X 60) mm , Ø 60 mmSPEED : (300 ~ 4,000) rpmWHEEL : DIAMOND WHEELWHEEL DAI : Ø(75 ~ 200) mmLUBRICATLON : PUMPINGCUTTING : MOTOREZEDTYP : AUTOMATIC..

[Daekyung Tech] Low speed precision cutting machineQuote Contact_ cs@roasexpo.comIt is cut at low speed with a diamond wheel so that small specimens can be cut precisely.CAPACITY : (25 X 25) mm, Ø30 mmSPEED : (30 ~ 500) prmWHEEL : DIAMOND WHEELWHEEL DAI : Ø(75 ~ 125) mmLUBRICATION : SELF WETCUTTING : USING DEAD WEIGHTTYPE : MANUALPOWER :..

[Daekyung Tech] Notching molding machineQuote Contact_ cs@roasexpo.comA compact machine capable of making V-notches for plastic impact specimens.V NOTCH CUTTER : Ø75mmSPEED : (40 ~ 80) rpmSAMPLE : PLASTIC IMPACT SAMPLEMOVING : X-Y TABLEPOWER : 220V, 1PH, 1kW..

 [Daekyung Tech] Specimen cutting machineQuote Contact_ cs@roasexpo.comPaper and rubber samples are produced using pneumatic pressure.This is a molding machine that cuts thin samples such as rubber, plastic, paper,and corrugated cardboard in accordance with ASTM, KS, and ISO standards.It uses pneumatics and does not require a separate power s..

 [Dekyung Tech] Paper specimen cutting machineQuote Contact_ cs@roasexpo.comSpecimen maker V capable of cutting specimens for tensile testing and link rush compression..

[Daekyung Tech] Cord creep testerQuote Contact_cs@roasexpo.comIt is an equipment manufactured for the purpose of performing a creep test by inserting a tire cord in the form of a rubber and molded belt for a specified time with a constant load and temperature...

[Daekyung Tech] Automatic tension EPI deviceQuote Contact_cs@roasexpo.comThis equipment is designed to automatically wind the tire cord with a certain tension...

[Daekyung Tech] Cord dryerQuote Contact_cs@roasexpo.comIt is an equipment manufactured for the purpose of research/development by heat-treating and, chemically treating tire cords, which are reinforcement materials for automobile tires, before mass production.CAPACITY : 300N X 7 mACCURACY : WITHIN ± 0.5 %HEATING : (RT ~ 300) ℃SPEED : 3 m/..

[Daekyung Tech] Screen door testerQuote Contact_cs@roasexpo.comIt is designed and manufactured as a device that tests whether a sample is cracked or broken by reproducing the pressure applied to the screen door,a safety facility at a railway station, under similar conditions.CAPACITY : 400mmAgDETECTOR : LOAD CELL, LVD SENSORLOADING : HYDRAULIC CYLI..

[Daekyung Tech] Chair durability testerQuote Contact_cs@roasexpo.comFor the purpose of inspecting the safety of home chairs, the characteristics and, durability are automatically controlled to determine the product's deformation or pass/fail.CAPACITY : 1 kN, 2 kNDETECTOR : LOAD CELLLOADING : AIR SERVO CYLINDERMOVING : MOTORCONTROL : P.C CONTROLSAMP..

[Daekyung Tech] Flexural Vibration TesterQuote Contact_cs@roasexpo.comBy giving bending and vibration due to fatigue of the plastic pipe material for sewage pipe,the product is judged pass/fail based on whether it is cracked or damaged. It is easy to use and has the advantage of high reproducibility.CAPACITY : 10 kNMODE : FORCE CYCLE, VIBRATION TES..

[Daekyung Tech] Tire cord heat treatment testerQuote Contact_cs@roasexpo.comFiber cord is a direct material and reinforcement material due to technological advancement, and a large amount of it is used for hoses, belts, tires, and other elements. However, the requirements in the industrial field require the production of cords that can be used in a..

[Daekyung Tech] Vibration (earthquake) testerQuote Contact_cs@roasexpo.comIt is manufactured for the purpose of judging, researching, and developing the resistance,fatigue recovery, and deformation characteristics of materials by applying pressure and seismic waves with hydraulic force to various materials.CAPACITY : VERTICAL COMPRESS 150 kN (15 TF..

 [Daekyung Tech] Academia tester (P.C control type)Quote Contact@CS@roasexpo.comIt is equipped with functions such as P.C control, real-time graph output type, specified control of expansion rate,and measurement of expansion force, out of the existing simple functions.*Supplied to: POSCO R&D Center..

[Daekyung Tech] Tire cord bending testerQuote Contact_CS@roasexpo.comIt is an equipment that tests the durability of the cord inserted into the tire through the bending test at high temperature.CAPACITY : 100 kgf X 3 AXLESLOADING : CAM & MOTORTEMPERATURE : (RT ~ 150) ℃ANGLE : (0 ~ 30) ℃CONTROL : SEMI-AUTODEAD WEIGHT : 100 kgfCAM ADJUST : M..

Diesel vehicle smoke meter: This device measures the soot concentration of diesel (diesel) engines, and uses a partial flow sampling method light transmission method.CTN-2200: This is the product model name of CTN, which enables continuous measurement in real time and helps to measure the concentration of soot in automobiles.Smoke meter full set ac..

Diesel vehicle smoke meter: This device measures the soot concentration of diesel (diesel) engines, and uses a partial flow sampling method light transmission method.CTN-2200: This is the product model name of CTN, which enables continuous measurement in real time and helps to measure the concentration of soot in automobiles.Additional accessories ..

Diesel vehicle smoke meter: This device measures the soot concentration of diesel (diesel) engines, and uses a partial flow sampling method light transmission method.CTN-2200: This is the product model name of CTN, which enables continuous measurement in real time and helps to measure the concentration of soot in automobiles.Additional accessories ..

Diesel vehicle smoke meter: This device measures the soot concentration of diesel (diesel) engines, and uses a partial flow sampling method light transmission method.CTN-2200: This is the product model name of CTN, which enables continuous measurement in real time and helps to measure the concentration of soot in automobiles.Additional accessories ..

- The design of the bag may differ from the photo, but the function remains unchanged.- Made in KOREA..

- The design of the bag may differ from the photo, but the function remains unchanged.- Made in KOREA..

- Size: 110x180x60- Components: Body + Bag + 2-wire lead..

- This is a product that plugs directly into an outlet to determine the presence or absence of grounding. It is used to find the presence or absence of LIVE (HOT) current incoming lines and grounding lines.-Size: 80x40x40..