[Daekyung Tech] DuPont Impact TesterQuote inquiry_ CS@roasexpo.comThis is a small drop impact tester that tests samples by dropping weights of different weights.In general, samples with paints, films, and coatings applied to metal plates are used.The drop height can be manually set, and the maximum drop height is 500 mm...

[Daekyung Tech] Charpy Impact Tester-SmallQuote inquiry_ CS@roasexpo.comASTM E23ASTM D256ISO 179It is a low-capacity Charpy impact tester.The weight is manually raised and the data is read directly from the dial gauge.specificationCapacity: 3J, 6J, 15JMaximum tensile angle: 120 degreesWeight of weight: 2.44 kgInternational Standard: ASTM E23, D256,..

[Daekyung Tech] Izod impact testerQuote inquiry_ CS@roasexpo.comASTM E23ASTM D256ISO179conforms toIt is a digital type Izod small impact tester.The angle of the weight and the impact energy value after the test are automatically calculated and displayed.specificationCapacity: 3J, 6J, 15JMaximum tensile angle: 120 degreesWeight of weight: 2.44 kgSiz..

[Daekyung Tech] Izod impact testerQuote inquiry_ CS@roasexpo.comASTM E23ASTM D256ISO179It meets the specifications.The Izod impact tester is generally used to measure the impact energy of non-metallic samples.specificationCapacity: 3J, 6J, 15JMaximum tensile angle: 120 degreesWeight of weight: 2.44 kgSize: 560 x 400 x 450 mmTotal weight: about 50 k..

[Daekyung Tech] Charpy Impact TesterQuote inquiry_ CS@roasexpo.comASTM E23ASTM A370ASTM D6110It is a Charpy impact tester that conforms toImpact testers for standard specimens are largely divided into Charpy and Izod methods.Whereas Charpy places the sample horizontally on the ground and tests, Izod installs the sample vertically.Since an important..

[Daekyung Tech] Spring tester 30 kNQuote Contact_CS@roasexpo.comIt is a spring tester of up to 30 kN.It has a normal UTM frame, but it has been modified to fit the spring test.Due to the nature of the high-load spring, if a single load cell is used, it is easily damaged due to the influence of the eccentric load.Daekyung Tech's products are designe..

[Daekyung Tech] Spring tester 5kNQuote Contact_CS@roasexpo.comThis equipment is used to find the spring constant K of a general coil spring.It is designed to be tested in both tensile and compressive directions.You can run the test simply by using the touch screen.The free height of the spring can be measured automatically at the start of the test...

[Daekyung Tech] Coil spring testerQuote Contact_CS@roasexpo.comThis is a testing machine for testing the coil spring used in the high-speed train KTX.Since the springs used in railway use two springs overlapping each other, it is necessary to check the deflection angles of the inner and outer springs and combine them in opposite directions.Daekyung..

[Daekyung Tech] Ring crush compression testerQuote Contact_CS@roasexpo.comThis equipment tests the compressive strength of corrugated cardboard.The test is conducted under the conditions of RCT/ECT/FCT/FAT/CMT/CCT.The maximum load is 5,000 N and the test speed is up to 50 mm/min.Depending on the test method, various pressing jigs are used...

 [Daekyung Tech] Box compression strength testerQuote Contact_CS@roasexpo.comBox compressive strength testerThis is a testing machine that tests the compressive strength of boxes, pallets, and packaging containers.It is usually used to figure out how many layers can be stacked when stacking products.We manufacture machines and jigs in various ..

 [Daekyung Tech] Earthquake generation testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of judging or researching and developing the resistance,fatigue recovery, and deformation characteristics of materials by applying pressure and seismic waves to various materials with hydraulic force...

[Daekyung Tech] Motor type bending Wdaring TesterQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of researching and developing the resistance,fatigue recovery, and deformation characteristics of materials by applying fatigue to various materials with the power of the motor...

[Daekyung Tech] Car body buckling testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of researching and developing the resistance,fatigue recovery, and deformation characteristics of materials by applying pressure and seismic waves with hydraulic force to various materials...

[Daekyung Tech] High-strength pipe bending fatigue testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of researching and developing the resistance,fatigue recovery, and deformation characteristics of materials by applying pressure and seismic waves with hydraulic force to various materials...

[Daekyung Tech] 1/4 Car Hydrauilc ExciterQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of research and development or to judge material resistance,fatigue recovery, and deformation characteristics by applying pressure and vibration wavelength to the 1/4 car with hydraulic power...

[Daekyung Tech] Horizontal tensile fatigue testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of research and development or judging the resistance, fatigue recovery,and deformation characteristics of materials by applying hydraulic force to various materials...

[Daekyung Tech] 30MN bridge elastic bearing and LRB composite testerQuote Contact_CS@roasexpo.comIt is a composite structure tester that can test the performance of elastic bearings for bridges,vibration-proof rubber, and LRB for construction...

[Daekyung Tech] Vibration tester (hydraulic servo control type)Quote Contact_CS@roasexpo.comThe hydraulic exciter is an excitation for modal testing of parts and equipment,and it is a testing machine that can perform vibration fatigue of parts and equipment.Since high-frequency motion is required rather than low-frequency motion due to the characte..

 [Daekyung Tech] Actuator for structural testingQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of judging or researching and developing material resistance,fatigue recovery, and fatigue failure by repeatedly pressing the structure with hydraulic force...

[Daekyung Tech] 3-axis fatigue testerQuote Contact_CS@roasexpo.comThis is a fatigue tester manufactured to the customer's specifications.This is a test to check if an abnormality occurs in the product by generating vibration in the X-Y-Z 3 axes.It is designed with the assumption of vibrations generated during transportation of home appliances such ..

[Daekyung Tech] Universal Formability TesterQuote Contact@CS@roasexpo.comIt is a method of evaluating the formability and workability of steel sheet materials,and it is designed and manufactured as a PC control type as an equipment to test the phenomenon of plastic deformation without judgment of the material.Product Name: Universal Formability Tes..

[Daekyung Tech] Pipe test machineQuote Contact@CS@roasexpo.comIt has been produced for the purpose of reaching the goal by applying the Cracky or Academic Ratio by dividing iron and non-metallic pipes into 8 equal parts...

[Daekyung Tech] Friction wear testerQuote Contact@CS@roasexpo.comIt is a tester that evaluates the abrasion of various materials such as metals and non-metals.Type: program control and measurement, friction coefficient, frictiondistance, friction time storage and outputMeasured friction force: 0 to 20 kgfPressing force: 1.5 Mpa (15.3 kgf)Rotation m..

[Daekyung Tech] Taber wear testerQuote Contact@CS@roasexpo.comIt is a testing machine that evaluates the abrasion of various materials such as leather, polymers, and non-metals with a wear wheel with a set standard...

[Daekyung Tech] Mobile phone wear testerQuote Contact@CS@roasexpo.comThis equipment is a device that measures the lifespan of the contact point when charging the cell phone battery through an endurance test...