[Daekyung Tech] Constant Speed ​​Friction TesterQuote Contact_CS@roasexpo.comThis equipment is manufactured for the purpose of research and quality control byapplying brake-pad to the surface of a metal rotating plate under constant load and temperature conditions to obtain data such as friction,abrasion, and number of frictions.BRAKE-PAD (automobi..

[Daekyung Tech] Friction fastness testerQuote Contact_CS@roasexpo.comThis tester is a device that tests the frictional resistance of the surface of a sample (vehicle interior materials, building interior materials, etc.)by rubbing it at the prescribed load and speed.Power: AC 220V, 60HzPower consumption: 0.2kWCounting device: 6 rows settingNumber o..

[Daekyung Tech] Hydraulic wear testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of analyzing, researching,and developing the characteristics of the sample after the durability test is completed by applying torsion after applying a constant load to the thrust bearing.CAPACITY : TORQUE 3 kN.m / FORCE 100kNACCURACY : WITHIN ±1 %CO..

[Daekyung Tech] Stabilizer pushing force testerQuote Contact_CS@roasexpo.comThis equipment is manufactured for the purpose of testing and managing the stopper clamping force of the vehicle suspension device,the stabilizer, after mass production, or for research/development before mass production.CAPACITY: 20kNLOADING : SERVO MOTORMODE : CLAMPING FO..

[Daekyung Tech] Real Load Torque Calibrator (100~200) N.mQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric torque measuring instruments (torque cells).It is a real load torque calibrator with a maximum capacity of 2000 N.m.Equipment supplied to Kia Motors.F2 class weights are used, and clockwise/counterclo..

[Daekyung Tech] Composite mechanical torque correctorQuote Contact_CS@roasexpo.comThis product is a standard instrument for calibrating a torque wrench inspection machine,and it realizes convenience and cost reduction by using vertical and horizontal separation types in one equipment...

[Daekyung Tech] Real load torque calibrator 30kN (special specification)Quote Contact_CS@roasexpo.comIt is a device that can calibrate a torque sensor with an actual load.Maximum measuring capacity: 30 kNA variety of weights are applied to accurately measure torque.Used by the Republic of Korea Army.CAPACITY :  (100, 500, 1,000, 2,000)N.mCONTR..

[Daekyung Tech] Rubber durometer calibratorQuote Contact_CS@roasexpo.comIt is an equipment to check the load of rubber and plastic hardness testers (Shore, A, B, C, D types).This equipment is used for calibration and testing of electric or dial-type rubber durometers,and has the advantage of being easy to use and highly reproducible.CAPACITY : (0 ~..

[Daekyung Tech] Real load torque calibrator 100 NMQuote Contact_CS@roasexpo.comIt is a device for correcting torque.The maximum torque is 100 NM, automatically sets the weight, and is designed to measure clockwise/counterclockwise torque.All courses are conducted through Daekyung Tech's dedicated program.The above products are being supplied and us..

[Daekyung Tech] Real load torque calibrator 100 NMQuote Contact_CS@roasexpo.comIt is a device for correcting torque.The maximum torque is 100 NM, automatically sets the weight, and is designed to measure clockwise/counterclockwise torque.All courses are conducted through Daekyung Tech's dedicated program.The above products are being supplied and us..

[Daekyung Tech] Hydraulic force calibratorQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric force measuring instruments (load cells), and is used to correct the difference between the high-precision master cell,  and the device to be calibrated or to issue a report by the calibration procedure.It is a ..

[Daekyung Tech] Real load force calibrator 10kNQuote Contact_CS@roasexpo.comIt is a standard calibration device that is used for calibration and testing of electric force measuring instruments (load cells), and is calibrated by accurate weight including local gravitational acceleration.It is an instrument for calibrating force measuring instruments..

[Daekyung Tech] Hydraulic force calibratorQuote Contact_CS@roasexpo.comIt is a hydraulic force calibrator with a capacity of 5 MN (approximately 500 tons).It has an uncertainty of 0.05% and is equipped with a two-stage master cell of 5 MN + 2 MN.Tensile/compression bidirectional measurement is possible.It was delivered to VMI in Hanoi, Vietnam, whi..

[Daekyung Tech] Push-pull gauge calibratorQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric or dial-type push-pull gauges.CAPACITY :  ( 2 ~ 2,000) NCONTROL : MANUALLOADING : DEAD WEIGHTDEAD WEIGHT : STEEL COATING, F2 GRADEMODE : TENSILE , COMPRESSION..

[Daekyung Tech] Hydraulic force calibrator 1 MNQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric force measuring instruments (load cells), and is used to correct the difference between the high-precision master cell,  and the device to be calibrated or to issue a report by the calibration procedure.It ..

[Daekyung Tech] Hydraulic force calibrator 20kNQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric force measuring instruments (load cells), and is used to correct the difference between the high-precision master cell,  and the device to be calibrated or to issue a report by the calibration procedure.It ..

[Daekyung Tech] Force cailbrator by dead weightQuote Contact_CS@roasexpo.comIt is a standard calibration device that is used for calibration and testing of electric force measuring instruments (load cells), and is calibrated by accurate weight including local gravitational acceleration.CAPACITY :  200 N ~ 20kNBMC : WITHIN 0.005 %LOADING : AIR ..

[Daekyung Tech] Hydraulic force calibrator 50kNQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric force measuring instruments (load cells), and is used to correct the difference between the high-precision master cell,  and the device to be calibrated or to issue a report by the calibration procedure.It ..

[Daekyung Tech] Tire durability testerQuote Contact_ CS@roasexpo.comThis is a testing machine designed to test the durability of tires.The wear resistance of tires is tested by creating an environment similar to real driving conditions.It is an equipment that obtains results by measuring the characteristics of a tire by rotating a vehicle tire unde..

[Daekyung Tech] Clutch Cover Characteristics TesterQuote Contact_ CS@roasexpo.comThis is a dedicated testing machine for clutch cover characteristics for automobiles.Delivered to SECO.It is a device that obtains results by measuring the operation area and characteristics by applying a load to the release lever and clutch disk.CAPACITY : CLAMPING LO..

[Daekyung Tech] Ball Joint Gap TesterQuote Contact_CS@roasexpo.comAfter checking the gap characteristics of the ball joint,a durability test is performed and the changed characteristics are judged by comparing before and after the test.CAPACITY : ±30 kNRESOLUTION : WITHIN ±0.5%FREQUENCY : 40HzCONTROL : P.C CONTROLSAMPLE : IBJ, OBJMODE : L..

[Daekyung Tech] Ball Joint Durability TesterQuote Contact_CS@roasexpo.comDTE-179M- This device is a dust cover durability tester.-It is an equipment for the durability tester of the dust cover, and it uses a computer system to Test samples under environmental conditions using a hydraulic system and chamber controlled by servo valve It was..

[Daekyung Tech] Ball Joint Durability TesterQuote Contact_CS@roasexpo.comThis equipment performs long-term durability tests on vehicle ball joints at specified angles at room temperature, high temperature, and low temperature.After the test, the condition of the ball joint and the condition of the rubber cover are analyzed.At this time, the test ca..

[Daekyung Tech] Seat frame strength testerQuote Contact_ CS@roasexpo.comIt is a testing machine that tests the frame rigidity of automobile seats.Secure the seat frame to the T-slot bed at the back and pull it with a chain to test its strength.In consideration of the load transfer during an automobile accident or sudden braking, the test is carried..

[Daekyung Tech] Clutch release lever durability testerQuote Contact_cs@roasexpo.comIt is a device that obtains results by measuring the operation and characteristics of the release lever by repeating the durability test.It is for clutch tester of large vehicles.It was delivered to the research institute attached to the automobile.CAPACITY : (0 ~ 15..