[Daekyung Tech] 30MN bridge elastic bearing and LRB composite testerQuote Contact_CS@roasexpo.comIt is a composite structure tester that can test the performance of elastic bearings for bridges,vibration-proof rubber, and LRB for construction...

[Daekyung Tech] Vibration tester (hydraulic servo control type)Quote Contact_CS@roasexpo.comThe hydraulic exciter is an excitation for modal testing of parts and equipment,and it is a testing machine that can perform vibration fatigue of parts and equipment.Since high-frequency motion is required rather than low-frequency motion due to the characte..

 [Daekyung Tech] Actuator for structural testingQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of judging or researching and developing material resistance,fatigue recovery, and fatigue failure by repeatedly pressing the structure with hydraulic force...

[Daekyung Tech] 3-axis fatigue testerQuote Contact_CS@roasexpo.comThis is a fatigue tester manufactured to the customer's specifications.This is a test to check if an abnormality occurs in the product by generating vibration in the X-Y-Z 3 axes.It is designed with the assumption of vibrations generated during transportation of home appliances such ..

[Daekyung Tech] Universal Formability TesterQuote Contact@CS@roasexpo.comIt is a method of evaluating the formability and workability of steel sheet materials,and it is designed and manufactured as a PC control type as an equipment to test the phenomenon of plastic deformation without judgment of the material.Product Name: Universal Formability Tes..

[Daekyung Tech] Pipe test machineQuote Contact@CS@roasexpo.comIt has been produced for the purpose of reaching the goal by applying the Cracky or Academic Ratio by dividing iron and non-metallic pipes into 8 equal parts...

[Daekyung Tech] Friction wear testerQuote Contact@CS@roasexpo.comIt is a tester that evaluates the abrasion of various materials such as metals and non-metals.Type: program control and measurement, friction coefficient, frictiondistance, friction time storage and outputMeasured friction force: 0 to 20 kgfPressing force: 1.5 Mpa (15.3 kgf)Rotation m..

[Daekyung Tech] Taber wear testerQuote Contact@CS@roasexpo.comIt is a testing machine that evaluates the abrasion of various materials such as leather, polymers, and non-metals with a wear wheel with a set standard...

[Daekyung Tech] Mobile phone wear testerQuote Contact@CS@roasexpo.comThis equipment is a device that measures the lifespan of the contact point when charging the cell phone battery through an endurance test...

[Daekyung Tech] Constant Speed ​​Friction TesterQuote Contact_CS@roasexpo.comThis equipment is manufactured for the purpose of research and quality control byapplying brake-pad to the surface of a metal rotating plate under constant load and temperature conditions to obtain data such as friction,abrasion, and number of frictions.BRAKE-PAD (automobi..

[Daekyung Tech] Friction fastness testerQuote Contact_CS@roasexpo.comThis tester is a device that tests the frictional resistance of the surface of a sample (vehicle interior materials, building interior materials, etc.)by rubbing it at the prescribed load and speed.Power: AC 220V, 60HzPower consumption: 0.2kWCounting device: 6 rows settingNumber o..

[Daekyung Tech] Hydraulic wear testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of analyzing, researching,and developing the characteristics of the sample after the durability test is completed by applying torsion after applying a constant load to the thrust bearing.CAPACITY : TORQUE 3 kN.m / FORCE 100kNACCURACY : WITHIN ±1 %CO..

[Daekyung Tech] Stabilizer pushing force testerQuote Contact_CS@roasexpo.comThis equipment is manufactured for the purpose of testing and managing the stopper clamping force of the vehicle suspension device,the stabilizer, after mass production, or for research/development before mass production.CAPACITY: 20kNLOADING : SERVO MOTORMODE : CLAMPING FO..

[Daekyung Tech] Real Load Torque Calibrator (100~200) N.mQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric torque measuring instruments (torque cells).It is a real load torque calibrator with a maximum capacity of 2000 N.m.Equipment supplied to Kia Motors.F2 class weights are used, and clockwise/counterclo..

[Daekyung Tech] Composite mechanical torque correctorQuote Contact_CS@roasexpo.comThis product is a standard instrument for calibrating a torque wrench inspection machine,and it realizes convenience and cost reduction by using vertical and horizontal separation types in one equipment...

[Daekyung Tech] Real load torque calibrator 30kN (special specification)Quote Contact_CS@roasexpo.comIt is a device that can calibrate a torque sensor with an actual load.Maximum measuring capacity: 30 kNA variety of weights are applied to accurately measure torque.Used by the Republic of Korea Army.CAPACITY :  (100, 500, 1,000, 2,000)N.mCONTR..

[Daekyung Tech] Rubber durometer calibratorQuote Contact_CS@roasexpo.comIt is an equipment to check the load of rubber and plastic hardness testers (Shore, A, B, C, D types).This equipment is used for calibration and testing of electric or dial-type rubber durometers,and has the advantage of being easy to use and highly reproducible.CAPACITY : (0 ~..

[Daekyung Tech] Real load torque calibrator 100 NMQuote Contact_CS@roasexpo.comIt is a device for correcting torque.The maximum torque is 100 NM, automatically sets the weight, and is designed to measure clockwise/counterclockwise torque.All courses are conducted through Daekyung Tech's dedicated program.The above products are being supplied and us..

[Daekyung Tech] Real load torque calibrator 100 NMQuote Contact_CS@roasexpo.comIt is a device for correcting torque.The maximum torque is 100 NM, automatically sets the weight, and is designed to measure clockwise/counterclockwise torque.All courses are conducted through Daekyung Tech's dedicated program.The above products are being supplied and us..

[Daekyung Tech] Hydraulic force calibratorQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric force measuring instruments (load cells), and is used to correct the difference between the high-precision master cell,  and the device to be calibrated or to issue a report by the calibration procedure.It is a ..

[Daekyung Tech] Real load force calibrator 10kNQuote Contact_CS@roasexpo.comIt is a standard calibration device that is used for calibration and testing of electric force measuring instruments (load cells), and is calibrated by accurate weight including local gravitational acceleration.It is an instrument for calibrating force measuring instruments..

[Daekyung Tech] Hydraulic force calibratorQuote Contact_CS@roasexpo.comIt is a hydraulic force calibrator with a capacity of 5 MN (approximately 500 tons).It has an uncertainty of 0.05% and is equipped with a two-stage master cell of 5 MN + 2 MN.Tensile/compression bidirectional measurement is possible.It was delivered to VMI in Hanoi, Vietnam, whi..

[Daekyung Tech] Push-pull gauge calibratorQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric or dial-type push-pull gauges.CAPACITY :  ( 2 ~ 2,000) NCONTROL : MANUALLOADING : DEAD WEIGHTDEAD WEIGHT : STEEL COATING, F2 GRADEMODE : TENSILE , COMPRESSION..

[Daekyung Tech] Hydraulic force calibrator 1 MNQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric force measuring instruments (load cells), and is used to correct the difference between the high-precision master cell,  and the device to be calibrated or to issue a report by the calibration procedure.It ..

[Daekyung Tech] Hydraulic force calibrator 20kNQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric force measuring instruments (load cells), and is used to correct the difference between the high-precision master cell,  and the device to be calibrated or to issue a report by the calibration procedure.It ..