- Country of origin: Japan..

- Country of origin: Japan..

..

- Excellent thermal conductivity: We reviewed the external design and internal structure of the soldering iron and adopted the "T18 series" and "T19 series" with improved thermal conductivity. By varying the external shape and internal thickness of the iron, the heat storage of the T19 has been improved, allowing work that requires heat capacity to..

..

..

Hot Tweezer FX-8804 suitable for SMD rework of chip components and SOP components- By directly heating and removing only the soldered area of ​​the component to be removed by sandwiching it with tweezers, repair is possible with minimal thermal impact on surrounding components or the board.- FX-8804 can be used by connecting to FX-888D / 888DX / FX..

Highest specifications model with only the best specifications of SMD- Data up/down possible through USB port, various conditions can be set by linking with PC.- Profile creation is possible under near real-time conditions.- Includes C5037 preheater, includes FR-811 BGA SMD rework station, includes C5027 BOARD HOLDER, includes C5029 GRIP FIXTURE "L..

- Suitable for chip component repair, and the air volume switching switch allows work to be done with very fine wind.- Composition: main body, soldering iron, nozzle (inner diameter 02mm: No.A1066), soldering iron holder (B1190), nozzle holder (B1212)..

Soldering as well as solder removal and SMD REWORK are possible with the latest multi-function stataion.- Combining 3 soldering irons, FX-889 soldering iron, FR-410 soldering iron, and hot air F-810B into one unit. One soldering iron of L type FX-8805 is attached.- Toolbox provided C5030: FH410-81 for cleaning pin nozzle Ø1.0mm, cleaning pin heater..

- Excellent heat recovery: Adopts heater and sensor integrated nozzle. Heat recovery characteristics are dramatically improved, so there is virtually no clogging. Additionally, the distance from the tip of the nozzle to the filter pipe has been shortened to prevent clogging.- Simple maintenance: The filter pipe is made of paper and is a disposable ..

Multi-function in one product (soldering, desoldering, SMD rework)- Compatible with various soldering irons. Adoption of large LCD panel. Graphic LCD Play- Simple operation method. N2 system compatible products- Detailed work possible by direct heat application- FR-206 main body, power plug, tip holder, FM-2027 set, FM-2024 set, FM-2029 set..

Simple profile work is possible with the preset linkage function.- You can easily set the pre-registered temperature setting. (Available for up to 5 units) Efficiency can be increased by saving work time.- Equipped with a vacuum pick-up function as standard, increasing work time and efficiency.- Safety: Reinforced safety features by incorporating a..

- This is a high-specification product with excellent price-performance ratio and allows rework using hot air.- Equipped with a profile function that allows work in conditions close to reflow- A control panel that allows you to set even complex settings intuitively, allowing you to connect to a PC and measure, record, and modify the temperature of ..

-  C5016 하단 히터는 FR-811에 저장 되는 사용자 프로그래밍 가능 재작업 프로 파일의 실행으로 HAKKO FR-811 SMD 열풍 재작업 시스템에 의해 통합 되고 완전히 제어 됩니다.- 본 히터는 어셈블리의 램프 속도를 모니터링/제어 하는 기능을 포함 하 여 전력 또는 열전대 모드에서 작동 할 수 있습니다.- 참고: HAKKO C5016는 FR-811와 함께 사용 해야 합니다. 독자적으로 작동하지 않습니다...

- Country of origin: Japan..

..

..

..

..

..

..

..

..

..