- Length: 400mm, 300mm..

10 pack of pre-filters for the FA-430 Fume Extraction System. Use with the A1573 main HEPA filter. Note: Please note that the filters we use in our fume extraction systems are designed for removing particulate and byproducts from the soldering process ONLY. The filter media is not designed to be used as any type of respiratory mask or componen..

- Pleated filter captures 99.97% of particles 0.3µm in size.- Main HEPA filter for the FA-430 Fume Extraction System. For use with A1572 pre-filters...

- Made with urethane foam with refined, active, high absorption carbon.- Size: 130x130x10mm- Activated carbon amount: 7g- Amount of harmful substances that can be absorbed per filter: 2g- Quantity: 5pcs/set..

- Clear bench top hood for the FA-430 Smoke and Fume Extraction System. - The following products are required to use the hood with the FA-430: B2410 neoprene duct, B2416 clamp, and the B3621 adapter...

..

..

- T30 Series Micro Knife Tip For use with the FM-2032 1.8mm/45° x 6mm..

- T30 Series Micro Knife Tip For use with the FM-2032. TIP, KNIFE, 1.4mm / 45° x 8.5mm..

-T30 Series Micro Conical Tip For use with the FM-2032. CONICAL, R0.1 x 6mm,..

- T30 Series Micro J angle Tip For use with the FM-2032. R 0.2mm / 40° angle x 3mm..

- T30 Series Micro Chisel Tip Tip For use with the FM-2032. 0.6 x 6mm..

- T30 Series Micro Chisel Tip For use with the FM-2032. 1 x 6.5mm..

- It is a size that fits easily in one hand and was created for micro soldering under a microscope. Weight 14g, body Ø11.6, size 133.5mm (length)- Easy to separate/attach GRIP mark. Attach the GRIP mark for lead-free soldering or remove process soldering.- This conversion kit includes the sleek micro soldering iron, iron holder with sponge, heat re..

- Increases workability in mounting fine, high-density electronic components.- Ideal for micro soldering work under a microscope - Ultra-light type (weight 14g - when attached to a 1D soldering iron tip)- Compatible soldering iron stations: (FX-951, FX-952, FM-203, FM-206)..

- Soldering irons supported by absorbing pipe settings: handle diameter less than 16mm (e.g. HAKKO FM-2021, FM-2025, FM-2027, FM-2028, FM-2030, FX-8801, FX-8301, 907, 908) , 900M, 900L, 933, 934, DASH, etc.)- Perfectly compact and silent product for tabletop use: uses the required power supply without compressed air...

- The solder feeder requires an appropriate adjustment ring suitable for the diameter size of the lead being worked, a corresponding tube device to pull the solder up to the handpiece, and a guide pipe to take the lead out of the tube device and feed it to the tip of the soldering iron.- Country of origin: Japan..

- The solder feeder requires an appropriate adjustment ring suitable for the diameter size of the lead being worked, a corresponding tube device to pull the solder up to the handpiece, and a guide pipe to take the lead out of the tube device and feed it to the tip of the soldering iron.- Country of origin: Japan..

- The solder feeder requires an appropriate adjustment ring suitable for the diameter size of the lead being worked, a corresponding tube device to pull the solder up to the handpiece, and a guide pipe to take the lead out of the tube device and feed it to the tip of the soldering iron.- Country of origin: Japan..

- Country of origin: Japan..

- TIP, BEVEL, 1mm/60° x 14.2mm, IH, 450°C/840°F, FX-1001..

- Soldering Iro TIP, BEVEL, 2.8mm/60° x 17.6mm, IH, 450°C/840°F, FX-1001..

- Soldering Iron TIP, CONICAL, R0.2 x 12mm, IH, 450°C/840°F, FX-1001..

- Soldering Iron TIP, CHISEL, 0.8 x 9mm, IH, 450°C/840°F, FX-1001..

- Soldering Iron TIP, CHISEL, 1.6 x 10mm, IH, 450°C/840°F, FX-1001..