- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 1.4 mm (0.015 to 0.055inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches ..

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 1.4 mm (0.015 to 0.055inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches ..

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 1.4 mm (0.015 to 0.055inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches ..

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 0.8mm (0.015 to 0.031inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches t..

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 0.8mm (0.015 to 0.031inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches t..

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 0.6mm (0.015 to 0.023inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches t..

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 0.6mm (0.015 to 0.023inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches t..

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 0.6mm (0.015 to 0.023inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches t..

- Cutting, bending and forming machine for axial components.- The form obtained is a Stand-off which keeps the body of the component off the board.- No dies are required.- Large diameter components only: ,039-.055" (1-1.4mm) KC..

- Production: Tapped 25000p/h- LOOSE 5000 p/h- No dies are required.- Large diameter components only: ,039-.055" (1-1.4mm)..

- With TP6/PR-B it is possible to eliminate the preforming operation by replacing the cutting/forming wheels with only cutting wheel.- This system automatically adjusts the bending wheel, reducing the set-up time and making it easier. This system is available with all versions of TP6/PR-B machine.Warning : the maximum pitch possible with the /97 sy..

- Model TP6/S is equipment designed for cutting and bending of AXIAL COMPONET for VERTICAL MOUNTING.- TP6/S is provided in the most common dimensions, and custom versions can be manufactured to the consumer’s specifications...

- Model TP6/V is equipment designed for cutting and bending of AXIAL COMPONET for VERTICAL MOUNTING.- There are two types: lead diameter 0.5 ~ 0.8mm (0.019"~0.031") and lead diameter 0.8 ~ 1.3mm (0.031"~0.051").- The bending pitch can be changed by replacing CAM with different thickness...

- Model TP6/V is equipment designed for cutting and bending of AXIAL COMPONET for VERTICAL MOUNTING.- There are two types: lead diameter 0.5 ~ 0.8mm (0.019"~0.031") and lead diameter 0.8 ~ 1.3mm (0.031"~0.051").- The bending pitch can be changed by replacing CAM with different thickness...

..

- Model TP6/R-EC is designed for cutting of tapping type RADIAL COMPONENT. - This equipment can be supplied with two types of tape with HOLE spacing of 12.7 mm or 15 mm (0.5 or 0.59 inches).- Maintenance is mainly done by cleaning the disc...

- IC Lead can be designed to fit the PC Board.- Standard 3" & 6" Tube holder- Standard Pitches 3"(7.62mm), 6"(15.24mm)- Option: Motor Drive Unit..

..

..

..

Equipment that transfers parts such as resistance to a forming machine- CS10 FEEDER for: TP6, TP6/PR-B, TP6/S (Cod. 51.0100)- CS20 FEEDER for TP6/V-PR (Cod.51.0200)- CS30 FEEDER for TP6/V (Cod.51.0300)- CS40 FEEDER for TP6/PR-F (Cod. 51.0400)..

Equipment that transfers parts such as resistance to a forming machine- CS10 FEEDER for: TP6, TP6/PR-B, TP6/S (Cod. 51.0100)- CS20 FEEDER for TP6/V-PR (Cod.51.0200)- CS30 FEEDER for TP6/V (Cod.51.0300)- CS40 FEEDER for TP6/PR-F (Cod. 51.0400)..

Equipment that transfers parts such as resistance to a forming machine- CS10 FEEDER for: TP6, TP6/PR-B, TP6/S (Cod. 51.0100)- CS20 FEEDER for TP6/V-PR (Cod.51.0200)- CS30 FEEDER for TP6/V (Cod.51.0300)- CS40 FEEDER for TP6/PR-F (Cod. 51.0400)..

Equipment that transfers parts such as resistance to a forming machine- CS10 FEEDER for: TP6, TP6/PR-B, TP6/S (Cod. 51.0100)- CS20 FEEDER for TP6/V-PR (Cod.51.0200)- CS30 FEEDER for TP6/V (Cod.51.0300)- CS40 FEEDER for TP6/PR-F (Cod. 51.0400)..

..