Search

 [Daekyung Tech] Fully automatic universal material testing machineQuote Contact_cs@roasexpo.comIt is a fully automatic universal material testing machine.All you need to do is load the sample into the sample reservoir and everything after that is 100% automatic.The sequence of operations is as follows.1) Sample size measurement - using a las..

 [Daekyung Tech] Box compression strength testerQuote Contact_CS@roasexpo.comBox compressive strength testerThis is a testing machine that tests the compressive strength of boxes, pallets, and packaging containers.It is usually used to figure out how many layers can be stacked when stacking products.We manufacture machines and jigs in various ..

 [Daekyung Tech] Earthquake generation testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of judging or researching and developing the resistance,fatigue recovery, and deformation characteristics of materials by applying pressure and seismic waves to various materials with hydraulic force...

 [Daekyung Tech] Actuator for structural testingQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of judging or researching and developing material resistance,fatigue recovery, and fatigue failure by repeatedly pressing the structure with hydraulic force...

[Daekyung Tech] Oil resistance testerQuote inquiry_ CS@roasexpo.comThis tester is a device that inspects physical properties by heating a specimen while stirring it at a high temperature in oil.Since it consists of 4 test tubes, 4 samples can be measured at the same time...

 [Daekyung Tech] Ozone testerQuote inquiry_ CS@roasexpo.comIn order to measure the deterioration of vulcanized rubber due to ozone in the atmosphere,it is designed and manufactured for the purpose of investigating and, testing ozone resistance by exposing a test piece to air containing a low concentration of ozone, which is artificially genera..

 [Daekyung Tech] sour gasolin cycle testerQuote Contact_cs @roasexpo.comOxidized gasoline is circulated in the fuel pipe for a certain period of time to check for leaks in the fuel pipe and coupler to determine the product's deformation or pass/fail.CAPACITY : 1.1 Mpa ( 11 kgf / ㎠ )DETECTOR : PRESSURE SENSORMODE : PRESSURE CYCLE, LEAK TES..

 [Daekyung Tech] Specimen cutting machineQuote Contact_ cs@roasexpo.comPaper and rubber samples are produced using pneumatic pressure.This is a molding machine that cuts thin samples such as rubber, plastic, paper,and corrugated cardboard in accordance with ASTM, KS, and ISO standards.It uses pneumatics and does not require a separate power s..

 [Dekyung Tech] Paper specimen cutting machineQuote Contact_ cs@roasexpo.comSpecimen maker V capable of cutting specimens for tensile testing and link rush compression..

 [Daekyung Tech] Academia tester (P.C control type)Quote Contact@CS@roasexpo.comIt is equipped with functions such as P.C control, real-time graph output type, specified control of expansion rate,and measurement of expansion force, out of the existing simple functions.*Supplied to: POSCO R&D Center..

Suitable for factories where small stickers and barcodes are attached with a minimal space occupied and a cute and elegant design that fits anywhere.- When used in an office space, the surroundings are neat and efficient.- Easy to put on and take off and compact in size even in industrial sites that produce a lot of small items.- Size: 96*138*220mm..

Label Combi-100 covering most sizes from small labels to regular labelsLabel Combi 100 is good to use when labels of various sizes are used, and when the label is long and the release paper is removed frequently, or when a faster speed is required.Size: 136*138*220mmFeeding Speed: 80mm/secLabel size: 5~100mmMax label roll diameter: pl 250mlUsable l..

This is a large label separator used when working with large labels, which is convenient for individual packaging of agricultural products, etc. or labeling on boxes.*Available when ordering for 200mm applications.Size: 216*242*358 mmFeeding Speed: 100mm/secLabel size: 5-180mmMax label roll diameter: pl 300mlUsable label material: any materialPower..

Label Combi 130 is 30mm wider and can be applied to almost all labels except large labels.*This is a semi-large class that can be applied even to exceeding the range of Label Combi-100. It is suitable when the label is a little larger than the general purpose or when you want a larger width with two or more rows.Size: 166*174*280mmFeeding Speed: 80..

-CORE C&T Mold Springs are from high-strength alloy material, ensuring durability and consistent performance for both injection molds (CF, CL) and press molds (CM, CH, CB). -These springs prevent damage from collisions, extend mold life, and reduce maintenance costs. -They provide reliable support with consistent elasticity, enha..

-CORE C&T Mold Springs are from high-strength alloy material, ensuring durability and consistent performance for both injection molds (CF, CL) and press molds (CM, CH, CB). -These springs prevent damage from collisions, extend mold life, and reduce maintenance costs. -They provide reliable support with consistent elasticity, enha..

-CORE C&T Mold Springs are from high-strength alloy material, ensuring durability and consistent performance for both injection molds (CF, CL) and press molds (CM, CH, CB). -These springs prevent damage from collisions, extend mold life, and reduce maintenance costs. -They provide reliable support with consistent elasticity, enha..

-CORE C&T Mold Springs are from high-strength alloy material, ensuring durability and consistent performance for both injection molds (CF, CL) and press molds (CM, CH, CB). -These springs prevent damage from collisions, extend mold life, and reduce maintenance costs. -They provide reliable support with consistent elasticity, enha..

-CORE C&T Mold Springs are from high-strength alloy material, ensuring durability and consistent performance for both injection molds (CF, CL) and press molds (CM, CH, CB). -These springs prevent damage from collisions, extend mold life, and reduce maintenance costs. -They provide reliable support with consistent elasticity, enha..

-CORE C&T Mold Springs are from high-strength alloy material, ensuring durability and consistent performance for both injection molds (CF, CL) and press molds (CM, CH, CB). -These springs prevent damage from collisions, extend mold life, and reduce maintenance costs. -They provide reliable support with consistent elasticity, enha..

-CORE C&T Mold Springs are from high-strength alloy material, ensuring durability and consistent performance for both injection molds (CF, CL) and press molds (CM, CH, CB). -These springs prevent damage from collisions, extend mold life, and reduce maintenance costs. -They provide reliable support with consistent elasticity, enha..

-CORE C&T Mold Springs are from high-strength alloy material, ensuring durability and consistent performance for both injection molds (CF, CL) and press molds (CM, CH, CB). -These springs prevent damage from collisions, extend mold life, and reduce maintenance costs. -They provide reliable support with consistent elasticity, enha..

-CORE C&T Mold Springs are from high-strength alloy material, ensuring durability and consistent performance for both injection molds (CF, CL) and press molds (CM, CH, CB). -These springs prevent damage from collisions, extend mold life, and reduce maintenance costs. -They provide reliable support with consistent elasticity, enha..

-CORE C&T Mold Springs are from high-strength alloy material, ensuring durability and consistent performance for both injection molds (CF, CL) and press molds (CM, CH, CB). -These springs prevent damage from collisions, extend mold life, and reduce maintenance costs. -They provide reliable support with consistent elasticity, enha..

Alphatec 56-100 Acid Resistant Apron is made of 0.46mm thick PVC and is flexible and protects against acids, bases, punctures, and abrasion!- Excellent chemical resistance protection: PVC fabric made with a thickness of 0.46mm provides excellent chemical resistance against acids and bases and mechanical protection against punctures and abrasion.- E..