Search

[Daekyung Tech] Automatic Brinell hardness testerQuote Contact_cs@roasexpo.comThe tester is an Automatic Brinell Hardness Tester,which is installed directly on the production line and designed,and manufactured for the purpose of inspecting the entire line when measuring Brinell hardness.Work process: Clamping>>Measure specimen DIA>>Meas..

[Daekyoung Tech] Pencil hardness testerQuote Contact_cs@roasexpo.comPencil hardness (electric) tester..

[Daekyung Tech] Brinell hardness tester (DTB-600N)Quote Contact_cs@roasexpo.comIt is a hydraulic Brinell hardness tester that tests by pressing the indenter of a steel ball into a specimen under a constant test load.-Main functions and featuresㆍEasy to operate with one touch until the test is completed.ㆍLoad maintenance and load removal are automat..

[Daekyung Tech] Brinell hardness tester (DTB-500)Quote Contact_cs@roasexpo.comIt is a hydraulic Brinell hardness tester that tests by pressing the indenter of a steel ball into a specimen under a constant test load.Main functions and features- When the load is maintained, the load drop phenomenon hardly occurs.- It is a high-precision entry-level m..

[Daekyung Tech] Coil spring testerQuote Contact_CS@roasexpo.comThis is a testing machine for testing the coil spring used in the high-speed train KTX.Since the springs used in railway use two springs overlapping each other, it is necessary to check the deflection angles of the inner and outer springs and combine them in opposite directions.Daekyung..

 [Daekyung Tech] Box compression strength testerQuote Contact_CS@roasexpo.comBox compressive strength testerThis is a testing machine that tests the compressive strength of boxes, pallets, and packaging containers.It is usually used to figure out how many layers can be stacked when stacking products.We manufacture machines and jigs in various ..

[Daekyung Tech] 30MN bridge elastic bearing and LRB composite testerQuote Contact_CS@roasexpo.comIt is a composite structure tester that can test the performance of elastic bearings for bridges,vibration-proof rubber, and LRB for construction...

 [Daekyung Tech] Actuator for structural testingQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of judging or researching and developing material resistance,fatigue recovery, and fatigue failure by repeatedly pressing the structure with hydraulic force...

[Daekyung Tech] 3-axis fatigue testerQuote Contact_CS@roasexpo.comThis is a fatigue tester manufactured to the customer's specifications.This is a test to check if an abnormality occurs in the product by generating vibration in the X-Y-Z 3 axes.It is designed with the assumption of vibrations generated during transportation of home appliances such ..

[Daekyung Tech] Composite mechanical torque correctorQuote Contact_CS@roasexpo.comThis product is a standard instrument for calibrating a torque wrench inspection machine,and it realizes convenience and cost reduction by using vertical and horizontal separation types in one equipment...

[Daekyung Tech] Clutch Cover Characteristics TesterQuote Contact_ CS@roasexpo.comThis is a dedicated testing machine for clutch cover characteristics for automobiles.Delivered to SECO.It is a device that obtains results by measuring the operation area and characteristics by applying a load to the release lever and clutch disk.CAPACITY : CLAMPING LO..

[Daekyung Tech] Ball Joint Gap TesterQuote Contact_CS@roasexpo.comAfter checking the gap characteristics of the ball joint,a durability test is performed and the changed characteristics are judged by comparing before and after the test.CAPACITY : ±30 kNRESOLUTION : WITHIN ±0.5%FREQUENCY : 40HzCONTROL : P.C CONTROLSAMPLE : IBJ, OBJMODE : L..

[Daekyung Tech] Ball Joint Durability TesterQuote Contact_CS@roasexpo.comDTE-179M- This device is a dust cover durability tester.-It is an equipment for the durability tester of the dust cover, and it uses a computer system to Test samples under environmental conditions using a hydraulic system and chamber controlled by servo valve It was..

[Daekyung Tech] Ball Joint Durability TesterQuote Contact_CS@roasexpo.comThis equipment performs long-term durability tests on vehicle ball joints at specified angles at room temperature, high temperature, and low temperature.After the test, the condition of the ball joint and the condition of the rubber cover are analyzed.At this time, the test ca..

[Daekyung Tech] Clutch release lever durability testerQuote Contact_cs@roasexpo.comIt is a device that obtains results by measuring the operation and characteristics of the release lever by repeating the durability test.It is for clutch tester of large vehicles.It was delivered to the research institute attached to the automobile.CAPACITY : (0 ~ 15..

[Daekyung Tech] Bicycle durability testerQuote Contact_CS@roasexpo.comThis is a bicycle parts durability tester supplied to Samchully Bicycle.It consists of a device that tests the durability of the front fork and rear shock,which are the main parts of a bicycle, and a device that runs under conditions similar to actual road driving after installin..

[Daekyung Tech] Bolt torsional testing machineQuote Contact_ CS@roasexpo.comIt is a tester that measures the torque and axial force of high-tensile bolts.CAPACITY : TORQUE 1kN.mTENSILE 200 kNACCURACY : WITHIN ± 1%BOLT SIZE : M(5 ~ 6)CONTROL : P.C CONTROLSAMPLE : BOLTOUTPUT : TORQUE, TENSILE, ANGLELOADING : SERVO MOTORSPEED : (1 ~ 5) rpm, (1 ~ ..

[Daekyung Tech] Bottle cap torque testerQuote Contact_cs@roasexpo.comThis is a tester that measures the torque generated when the bottle cap is opened.Data is displayed in units such as Nm, Ibf.in, etc., and test results are automatically saved in the desired folder.Up to 2 liter bottles can be tested, and samples from 12 to 24 can be adjusted acco..

[Daekyung Tech] Flame retardant tester (horizontal type)Quote inquiry_ CS@roasexpo.comThis tester is designed and manufactured in accordance with KS and UL standards for the purpose of inspecting the flame retardancy and, combustibility of specimens by controlling and applying the prescribed flame to specimens such as various wires, plastics, and f..

[Daekyung Tech] Oil resistance testerQuote inquiry_ CS@roasexpo.comThis tester is a device that inspects physical properties by heating a specimen while stirring it at a high temperature in oil.Since it consists of 4 test tubes, 4 samples can be measured at the same time...

 [Daekyung Tech] Ozone testerQuote inquiry_ CS@roasexpo.comIn order to measure the deterioration of vulcanized rubber due to ozone in the atmosphere,it is designed and manufactured for the purpose of investigating and, testing ozone resistance by exposing a test piece to air containing a low concentration of ozone, which is artificially genera..

 [Daekyung Tech] Air leak testerQuote Contact_cs @roasexpo.comBy measuring a certain amount of air leakage in the sample (product),the pass/fail of the product is judged. It is easy to use and has the advantage of high reproducibility.CAPACITY : 0.5 Mpa (0~5 kgf / ㎠)DETECTOR : PRESSURE SENSORLOADING : AIR CYLINDERPRESSURE : AIRCONTROL : SEMI-A..

[Daekyung Tech] Bursting strength testerQuote Contact_cs @roasexpo.comIt is designed and manufactured in digital type as equipment used to measure the breaking strength of various papers,woven fabrics, films, and corrugated cardboard.Input power: AC 220V, 60HzPower consumption: 0.5kWMaximum capacity: 50kgf/㎠Load display: DigitalDevice Size: (600X50..

 [Dekyung Tech] Paper specimen cutting machineQuote Contact_ cs@roasexpo.comSpecimen maker V capable of cutting specimens for tensile testing and link rush compression..

[Daekyung Tech] Cord creep testerQuote Contact_cs@roasexpo.comIt is an equipment manufactured for the purpose of performing a creep test by inserting a tire cord in the form of a rubber and molded belt for a specified time with a constant load and temperature...