Search

- Components: Main station (FN1010), stand (FH200), power cord, soldering iron stand (FH210-81), iron tip cleaner (FT401-81), cleaning wire (A1561), soldering iron (FN1101-81), instruction manual- IoL technology: Improvement of soldering technology corresponding to artificial intelligence, improved tracking, minimizing human errors, optimizing sold..

- Components: main station, soldering handle (FX-9701), stand (FH215), cleaning sponge, 2 color bands, USB cable, power cord, instruction manual- Setting temperature range: 50 to 450 degrees Celsius, when connecting a high-strength soldering iron - 50 to 550 degrees Celsius- Origin: Japan..

- Components: Main station, soldering handle (FX-8801), stand, cleaning sponge, cleaning wire, relay cord, rubber pad, 2 color bands, control card, power cord, instruction manual- Password function: Settings can be locked using a password to prevent them from being changed suddenly.- Preset mode: You can use preset mode when changing the set temper..

- Components: Main station, soldering handle (FM-2027), stand (FH200-02), solder removal (FM-2024-12), cleaner, relay cord, heat-resistant pad, tip holder, control card, power cord, instruction manual- Two thermometers can be mounted: Two thermometers can be operated as one station, and the soldering iron and set temperature can be individually con..

- Pre-heating effect: A pre-heating effect can be obtained by nitrogen gas passing through the soldering iron heater, and soldering can be done without raising the temperature of the iron tip even in lead-free soldering with a high melting point on high-density boards and multi-layer boards such as parts vulnerable to heat.- Improved melt spreadabi..

- The nitrogen gas generated is extremely high-performance with a maximum concentration of 99.9%.- Compact and space saving. It can also be used lying down regardless of direction.- External dimensions: 73(W) x280(H) x 66(D)mm..

- The nitrogen gas generated is high-performance and large-capacity with a maximum concentration of 99.9%.- Nitrogen gas can be supplied only with an air compressor, so no power source is needed, and two soldering irons can be used...

- Pre-heating effect: A pre-heating effect can be obtained by nitrogen gas passing through the soldering iron heater, and soldering can be done without raising the temperature of the iron tip even in lead-free soldering with a high melting point on high-density boards and multi-layer boards such as parts vulnerable to heat.- Improved melt spreadabi..

- Versatile Crafting Tool: Perfect for woodburning, leather crafting, sculptural art, and metal engraving, the HAKKO FD-200 is ideal for a wide range of creative projects.- Compact & Portable Design: Its small, lightweight body makes it convenient to use anywhere, whether in a workshop or at home.- Multi-Functionality: Easily switch between woo..

- Versatile Crafting Tool: Perfect for woodburning, leather crafting, sculptural art, and metal engraving, the HAKKO FD-210-01 is ideal for a wide range of creative projects.- Compact & Portable Design: Its small, lightweight body makes it convenient to use anywhere, whether in a workshop or at home.- Multi-Functionality: Easily switch between ..

- Excellent thermal efficiency of the IH (high frequency induction heating) method: It is different from the resistance heating method, which controls the temperature by turning the heater on and off using a sensor. The IH heating method generates heat and maintains a certain temperature of the iron tip itself, so it can exert soldering power where..

- Components: Main station, soldering handle (FM-2027), stand (FH200-02), cleaner, relay cord, heat-resistant pad, tip holder, control card, power cord, instruction manual- Two thermometers can be mounted: Two thermometers can be operated as one station, and the soldering iron and set temperature can be individually controlled.- Powerful heat recov..

- Quickly and reliably removes soldering from high-heat/heat-dissipating boards.- Improved manageability: Clear set temperature with large LCD. You can check solder clogging with a vacuum indicator.- It can handle work on large parts by adopting a filter pipe that is about three times larger than the existing filter pipe.- It can be cleaned and use..

- Various nozzle configurations, large LED display, 3 preset settings, password lock function- Anti-clogging function, easy maintenance- Composition: main body, stand (FH200), nozzle (N61-05), lead suction gun (FR-4003), stand, power cable, tool box (C5030)- Country of origin: Japan..

Highest specifications model with only the best specifications of SMD- Data up/down possible through USB port, various conditions can be set by linking with PC.- Profile creation is possible under near real-time conditions.- Includes C5037 preheater, includes FR-811 BGA SMD rework station, includes C5027 BOARD HOLDER, includes C5029 GRIP FIXTURE "L..

- Suitable for chip component repair, and the air volume switching switch allows work to be done with very fine wind.- Composition: main body, soldering iron, nozzle (inner diameter 02mm: No.A1066), soldering iron holder (B1190), nozzle holder (B1212)..

Soldering as well as solder removal and SMD REWORK are possible with the latest multi-function stataion.- Combining 3 soldering irons, FX-889 soldering iron, FR-410 soldering iron, and hot air F-810B into one unit. One soldering iron of L type FX-8805 is attached.- Toolbox provided C5030: FH410-81 for cleaning pin nozzle Ø1.0mm, cleaning pin heater..

- Excellent heat recovery: Adopts heater and sensor integrated nozzle. Heat recovery characteristics are dramatically improved, so there is virtually no clogging. Additionally, the distance from the tip of the nozzle to the filter pipe has been shortened to prevent clogging.- Simple maintenance: The filter pipe is made of paper and is a disposable ..

Multi-function in one product (soldering, desoldering, SMD rework)- Compatible with various soldering irons. Adoption of large LCD panel. Graphic LCD Play- Simple operation method. N2 system compatible products- Detailed work possible by direct heat application- FR-206 main body, power plug, tip holder, FM-2027 set, FM-2024 set, FM-2029 set..

Simple profile work is possible with the preset linkage function.- You can easily set the pre-registered temperature setting. (Available for up to 5 units) Efficiency can be increased by saving work time.- Equipped with a vacuum pick-up function as standard, increasing work time and efficiency.- Safety: Reinforced safety features by incorporating a..

- This is a high-specification product with excellent price-performance ratio and allows rework using hot air.- Equipped with a profile function that allows work in conditions close to reflow- A control panel that allows you to set even complex settings intuitively, allowing you to connect to a PC and measure, record, and modify the temperature of ..

-  C5016 하단 히터는 FR-811에 저장 되는 사용자 프로그래밍 가능 재작업 프로 파일의 실행으로 HAKKO FR-811 SMD 열풍 재작업 시스템에 의해 통합 되고 완전히 제어 됩니다.- 본 히터는 어셈블리의 램프 속도를 모니터링/제어 하는 기능을 포함 하 여 전력 또는 열전대 모드에서 작동 할 수 있습니다.- 참고: HAKKO C5016는 FR-811와 함께 사용 해야 합니다. 독자적으로 작동하지 않습니다...

- Country of origin: Japan..

- Select the heat supply pattern according to the type of lead: can be used in optimal conditions by setting parameters- You can select four patterns of heat supply settings: Sn-Pb (tin - lead), Sn-Ag-Cu (tin, silver, copper), Sn-Cu (tin, copper), and Sn (tin).- Accurate temperature management is possible: digital display allows setting in 1℃ incre..

- Optimized for dipping work on small parts- Lead tank (50), 100~450 degrees Celsius..