Search

Grid View:
-23%
Quickview

OLAMEF Forming Machine TP6-EC Series, TP6/1-EC, TP6_4-EC, TP6_6-EC, TP6_7-EC, FOR Cut And Bend Machine For Taped Axial Components

Ship from South Korea
USD $1,530.43 USD $2,000.00

- The model TP6 is designed for cutting and bending taped axial components with lead diameter from 0,4 to 1,4 mm (.015 to.055inc.). - The high quality and reliability of this machine ensure the best operation for a very long time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attac..

-7%
Quickview

OLAMEF Forming Machine TP6/1/97, Manual or Motorized Cutting Bending Machine For Taped Components, Lead Diameter of 0.4 ~ 1.4mm (0.031" ~ 0.055")

Ship from South Korea
USD $2,678.26 USD $2,869.57

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 1.4 mm (0.015 to 0.055inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches ..

-11%
Quickview

OLAMEF Forming Machine TP6/4, Manual or Motorized Reinforced Cutting Bending Machine For Taped Axial Components, Lead Diameter of 0.4 ~ 1.4mm (0.031" ~ 0.055")

Ship from South Korea
USD $2,391.30 USD $2,680.70

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 1.4 mm (0.015 to 0.055inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches ..

-7%
Quickview

OLAMEF Forming Machine TP6/4/97, Manual or Motorized Cutting Bending Machine For Taped Axial Components, Lead Diameter of 0.6 ~ 1.4mm (0.023~ 0.055")

Ship from South Korea
USD $2,678.26 USD $2,869.57

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 1.4 mm (0.015 to 0.055inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches ..

-8%
Quickview

OLAMEF Forming Machine TP6/6, Manual or Motorized Cutting Bending Machine For Taped Axial Components, Lead Diameter of 0.4 ~ 0.8mm (0.015~ 0.031"), ADJUSTABLE PITCH

Ship from South Korea
USD $2,391.30 USD $2,608.70

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 0.8mm (0.015 to 0.031inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches t..

-7%
Quickview

OLAMEF Forming Machine TP6/97, Manual or Motorized Cutting Bending Machine For Taped Axial Components, Lead Diameter of 0.4 ~ 0.8mm (0.015~ 0.031"), ADJUSTMENT

Ship from South Korea
USD $2,678.26 USD $2,869.57

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 0.8mm (0.015 to 0.031inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches t..

-8%
Quickview

OLAMEF Forming Machine TP6/7, Manual or Motorized Cutting Bending Machine For Taped Axial Components, Lead Diameter of 0.4 ~ 0.6mm (0.015~ 0.023"), FIX PITCH 5.08

Ship from South Korea
USD $2,391.30 USD $2,608.70

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 0.6mm (0.015 to 0.023inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches t..

-8%
Quickview

OLAMEF Forming Machine TP6/9, Cutting Bending Machine For Taped Axial Components, Lead Diameter of 0.4 ~ 0.6mm (0.015~ 0.023"), FIX PITCH 7.62mm

Ship from South Korea
USD $2,391.30 USD $2,608.70

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 0.6mm (0.015 to 0.023inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches t..

-8%
Quickview

OLAMEF Forming Machine TP6/10, Manual or Motorized Cutting Bending Machine For Taped Axial Components, Lead Diameter of 0.4 ~ 0.6mm (0.015~ 0.023"), FIX PITCH 10,16mm

Ship from South Korea
USD $2,391.30 USD $2,608.70

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 0.6mm (0.015 to 0.023inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches t..

-8%
Quickview

OLAMEF Forming Machine TP6/PR-B, Manual or Motorized Cutting Bending Machine For Taped Axial Components, Lead Diameter of 1 ~ 1.3mm (0.039 - 0.051")

Ship from South Korea
USD $3,826.09 USD $4,173.91

- Cutting, bending and forming machine for axial components.- The form obtained is a Stand-off which keeps the body of the component off the board.- No dies are required.- Large diameter components only: ,039-.055" (1-1.4mm) KC..

-6%
Quickview

OLAMEF Forming Machine TP6/PR-B-31, Manual or Motorized Cutting Bending Machine For Taped Axial Components, Lead Diameter of 1 ~ 1.4mm (0.039 - 0.055")

Ship from South Korea
USD $3,826.09 USD $4,086.96

- Production: Tapped 25000p/h- LOOSE 5000 p/h- No dies are required.- Large diameter components only: ,039-.055" (1-1.4mm)..

-11%
Quickview

OLAMEF Forming Machine TP6/EC-M, Manual Vertical Mounting Cutting Bending Machine For Taped Axial Components, Lead Diameter of 0.8 ~ 1.3mm (0.031 ~ 0.051")

Ship from South Korea
USD $2,869.57 USD $3,217.39

- Model TP6/V is equipment designed for cutting and bending of AXIAL COMPONET for VERTICAL MOUNTING.- There are two types: lead diameter 0.5 ~ 0.8mm (0.019"~0.031") and lead diameter 0.8 ~ 1.3mm (0.031"~0.051").- The bending pitch can be changed by replacing CAM with different thickness...

-12%
Quickview

OLAMEF Forming Machine TP IC-F, Cutting Bending Machine For IC's Components From Tube

Ship from South Korea
USD $1,913.04 USD $2,173.91

- IC Lead can be designed to fit the PC Board.- Standard 3" & 6" Tube holder- Standard Pitches 3"(7.62mm), 6"(15.24mm)- Option: Motor Drive Unit..

-15%
Quickview

OLAMEF Feeder for Cutting Forming Machine CS10

Ship from South Korea
USD $956.52 USD $1,130.43

Equipment that transfers parts such as resistance to a forming machine- CS10 FEEDER for: TP6, TP6/PR-B, TP6/S (Cod. 51.0100)- CS20 FEEDER for TP6/V-PR (Cod.51.0200)- CS30 FEEDER for TP6/V (Cod.51.0300)- CS40 FEEDER for TP6/PR-F (Cod. 51.0400)..

Quickview

OLAMEF Feeder for Cutting Forming Machine CS20

Ship from South Korea

Equipment that transfers parts such as resistance to a forming machine- CS10 FEEDER for: TP6, TP6/PR-B, TP6/S (Cod. 51.0100)- CS20 FEEDER for TP6/V-PR (Cod.51.0200)- CS30 FEEDER for TP6/V (Cod.51.0300)- CS40 FEEDER for TP6/PR-F (Cod. 51.0400)..

Quickview

OLAMEF Feeder for Cutting Forming Machine CS30

Ship from South Korea

Equipment that transfers parts such as resistance to a forming machine- CS10 FEEDER for: TP6, TP6/PR-B, TP6/S (Cod. 51.0100)- CS20 FEEDER for TP6/V-PR (Cod.51.0200)- CS30 FEEDER for TP6/V (Cod.51.0300)- CS40 FEEDER for TP6/PR-F (Cod. 51.0400)..

Quickview

OLAMEF Feeder for Cutting Forming Machine CS40

Ship from South Korea

Equipment that transfers parts such as resistance to a forming machine- CS10 FEEDER for: TP6, TP6/PR-B, TP6/S (Cod. 51.0100)- CS20 FEEDER for TP6/V-PR (Cod.51.0200)- CS30 FEEDER for TP6/V (Cod.51.0300)- CS40 FEEDER for TP6/PR-F (Cod. 51.0400)..

-8%
Quickview

OLAMEF County, Cutting Bending Machine Counter For Taped Axial and Radial Components

Ship from South Korea
USD $2,391.30 USD $2,608.70

- COUNTRY radial and axial tape reading- ELECT.SUPPLY = 220 or 110V..

-8%
Quickview

OLAMEF County-S, Cutting Bending Machine Counter For Taped Axial and Radial Components, Reel Type

Ship from South Korea
USD $4,782.61 USD $5,217.39

- Motorized counter for SMD (Cod.8301.101 - 8301.103) EMPTY REEL(8301.110)- Aluminium made, Inner 150/outer 350 mm diameter- Easily chargeable..

-7%
Quickview
-7%
Quickview
-11%
Quickview

OLAMEF 90° FORMING HAND TOOL PLIER 5040-7, ESD-safe handles, Tool length 158 mm

Ship from South Korea
USD $143.48 USD $160.87

- Special pliers used to bend the leads to 90°. With adjustable stop to adjust the forming distance (A). Max. forming width 16 mm, suitable for forming TO220 and TO247 components and other types of components. - This model combines the previous PN5040 and PN5040/5 tools. Steel thickness 5 mm. Tool length 158 mm. ESD-safe handles.- Grip model S..

-4%
Quickview

OLAMEF 90° FORMING HAND TOOL PLIER 5040-90D, ESD-safe handles, Tool length 158 mm

Ship from South Korea
USD $334.78 USD $347.83

- Special pliers that cut and bend the leads to 90° in one step. Equipped with an adjustable stop to adjust the distance. - Steel thickness 5 mm. Tool length 158 mm. ESD-safe handles.- Grip model St.- Origine: Italia..

Showing 1 to 25 of 47 (2 Pages)