Search

- The model TP6 is designed for cutting and bending taped axial components with lead diameter from 0,4 to 1,4 mm (.015 to.055inc.). - The high quality and reliability of this machine ensure the best operation for a very long time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attac..

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 1.4 mm (0.015 to 0.055inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches ..

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 1.4 mm (0.015 to 0.055inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches ..

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 1.4 mm (0.015 to 0.055inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches ..

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 0.8mm (0.015 to 0.031inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches t..

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 0.8mm (0.015 to 0.031inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches t..

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 0.6mm (0.015 to 0.023inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches t..

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 0.6mm (0.015 to 0.023inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches t..

- The model TP6 is designed for cutting and vending taped axial components with lead diameter form 0.4 to 0.6mm (0.015 to 0.023inc.). The high quality and reliability of this machine ensure the best operation for a very ling time.- Maintenance is mainly performed by cleaning the discs. The CS10 loose component feeder is an accessory that attaches t..

- Cutting, bending and forming machine for axial components.- The form obtained is a Stand-off which keeps the body of the component off the board.- No dies are required.- Large diameter components only: ,039-.055" (1-1.4mm) KC..

- Production: Tapped 25000p/h- LOOSE 5000 p/h- No dies are required.- Large diameter components only: ,039-.055" (1-1.4mm)..

- Model TP6/V is equipment designed for cutting and bending of AXIAL COMPONET for VERTICAL MOUNTING.- There are two types: lead diameter 0.5 ~ 0.8mm (0.019"~0.031") and lead diameter 0.8 ~ 1.3mm (0.031"~0.051").- The bending pitch can be changed by replacing CAM with different thickness...

..

- IC Lead can be designed to fit the PC Board.- Standard 3" & 6" Tube holder- Standard Pitches 3"(7.62mm), 6"(15.24mm)- Option: Motor Drive Unit..

..

Equipment that transfers parts such as resistance to a forming machine- CS10 FEEDER for: TP6, TP6/PR-B, TP6/S (Cod. 51.0100)- CS20 FEEDER for TP6/V-PR (Cod.51.0200)- CS30 FEEDER for TP6/V (Cod.51.0300)- CS40 FEEDER for TP6/PR-F (Cod. 51.0400)..

Equipment that transfers parts such as resistance to a forming machine- CS10 FEEDER for: TP6, TP6/PR-B, TP6/S (Cod. 51.0100)- CS20 FEEDER for TP6/V-PR (Cod.51.0200)- CS30 FEEDER for TP6/V (Cod.51.0300)- CS40 FEEDER for TP6/PR-F (Cod. 51.0400)..

Equipment that transfers parts such as resistance to a forming machine- CS10 FEEDER for: TP6, TP6/PR-B, TP6/S (Cod. 51.0100)- CS20 FEEDER for TP6/V-PR (Cod.51.0200)- CS30 FEEDER for TP6/V (Cod.51.0300)- CS40 FEEDER for TP6/PR-F (Cod. 51.0400)..

Equipment that transfers parts such as resistance to a forming machine- CS10 FEEDER for: TP6, TP6/PR-B, TP6/S (Cod. 51.0100)- CS20 FEEDER for TP6/V-PR (Cod.51.0200)- CS30 FEEDER for TP6/V (Cod.51.0300)- CS40 FEEDER for TP6/PR-F (Cod. 51.0400)..

- COUNTRY radial and axial tape reading- ELECT.SUPPLY = 220 or 110V..

- Motorized counter for SMD (Cod.8301.101 - 8301.103) EMPTY REEL(8301.110)- Aluminium made, Inner 150/outer 350 mm diameter- Easily chargeable..

..

..

- Special pliers used to bend the leads to 90°. With adjustable stop to adjust the forming distance (A). Max. forming width 16 mm, suitable for forming TO220 and TO247 components and other types of components. - This model combines the previous PN5040 and PN5040/5 tools. Steel thickness 5 mm. Tool length 158 mm. ESD-safe handles.- Grip model S..

- Special pliers that cut and bend the leads to 90° in one step. Equipped with an adjustable stop to adjust the distance. - Steel thickness 5 mm. Tool length 158 mm. ESD-safe handles.- Grip model St.- Origine: Italia..