- 360° Rotation with Rocker Arm: The SEYOUNGKP-AUX1T suspension arm offers full 360-degree rotation, allowing flexible and precise positioning during operation.- Expandable Shaft: The SHAFT body can extend up to 830mm, providing ample reach for various tasks.- Comfortable Operation: Equipped with a nitrogen gas stick inside the POWER ARM, the suspe..

..

Please note that this product does not apply to SY-9235LF...

- Can be used in Seyoung's DC electric screwdriver series- SLOW START can be adjusted between 0 and 3 seconds.- SLOW START speed can be adjusted within the range of 30% to 100% of normal work speed.- Brake output signal: 24VDC, 200mA- SLOW START can be stopped with the bypass switch, making it convenient to reversely rotate the screw.- Area 58X95X3..

- This is an electric screwdriver stand. - You can attach this product to the work table and store it by inserting an electric screwdriver.- The price is per piece...

..

..

..

..

..

..

- High-performance, long-life heater: Adopts ceramic insulators that have excellent heat storage properties and can heat efficiently.- Easy heater replacement: By adopting a cartridge-type heater, the heater can be replaced just by removing the screw on the protection pipe.- Safety design that makes it difficult to tip over even when working indepe..

..

..

..

..

- Fastened data (torque, speed, number of revolutions, time, etc.) can be checked in real time, and simple operation of the driver (torque, speed, etc.) is possible.- Additionally, the data displayed on the screen is saved in SD memory, and can also be saved and converted to EXCEL (however, one file per day is automatically created).- Screen displa..

- SCOUT II is a screw counter that can be used in conjunction with each dedicated controller.- By setting the total count quantity and the quantity for each fastening part, OK/NG judgment is made for the fastening work, and the quantity of screws to be fastened in the future is displayed.- Up to 5 electric drivers share 1 program- OK/NG judgment fo..

Input voltageAC120VC or AC220V, 50-60Hz, 2.5AOutput voltageDC40V, 3ATorque3.0 to 45 kgf.cmRotation speed (Speed)300-1,700Number of rotations (Turn)0.1 to 30Adjust torque offset value-20% to +20%Operating Environmental Conditions-40℃ / 15–80% RH (without dew)Input air pressure (bar) minimum 4.5 bar / maximum 6 barPreset parametertorque, ro..

Input voltageAC120VC or AC220V, 50-60Hz, 2.5AOutput voltageDC40V, 4ATorque12 to 100 kgf.cmRotation speed (Speed)300-1,500Number of rotations (Turn)0.1 to 30Adjust torque offset value-20% to +20%Operating Environmental Conditions-40℃ / 15–80% RH (without dew)Input air pressure (bar) minimum 4.5 bar / maximum 6 barPreset parametertorque, ro..

Input voltageAC120VC or AC220V, 50-60Hz, 2.5AOutput voltageDC24, 5ATorque0.1 to 15.0 kgf.cmRotation speed (Speed)100-1,000Number of rotations (Turn)0.4Adjust torque offset value-10% to +210%Operating Environmental Conditions0~40℃ / 15–80% RH (without dew)Input air pressure (bar) minimum 4.5 bar / maximum 6 barHow to select a setting addre..

Input voltageAC120VC or AC220V, 50-60Hz, 3AOutput voltageDC40, 5ATorque1 to 28.0 kgf.cmRotation speed (Speed)30-1,000Number of rotations (Turn)0.1Adjust torque offset value-10% to +10%Operating Environmental Conditions0~40℃ / 15–80% RH (without dew)How to select a setting address- Front Panel button- Outside 1/O-External sensor direct connection- D..

SMART-MANAGER..

SMART-MANAGER..

SMART-MANAGER..