USD $758.21 USD $907.72
- Select the heat supply pattern according to the type of lead: can be used in optimal conditions by setting parameters- You can select four patterns of heat supply settings: Sn-Pb (tin - lead), Sn-Ag-Cu (tin, silver, copper), Sn-Cu (tin, copper), and Sn (tin).- Accurate temperature management is possible: digital display allows setting in 1℃ incre..
USD $429.65 USD $453.86
- Optimized for dipping work on small parts- Lead tank (50), 100~450 degrees Celsius..
USD $454.92 USD $499.24
- Optimized for dipping work on small parts- Lead tank (70), 100~380 degrees Celsius..
USD $834.93 USD $907.72
- Components: FX-305 main body, B5322 lead tank cover, B2919 oxide collection stand, B2932 spatula, B1416 hex wrench (2mm), B2419 power cord, B5129 USB communication cable- High output reduces work preparation time by 60%. Temperature compensation function and maximum temperature of 530 degrees allow work on high-temperature, high-heat products (50..
USD $8.34 USD $9.08
This adapter connects the HAKKO C1571 and C1572 duct (B3642) to the Hakko FA-430 fume extraction unit...
USD $31.14 USD $37.82
- It is foldable and compact in size, making it easier to carry than existing stand-up soldering iron stands and its compact size makes it easy to store in a tool box.- Safety design: Silicone cover installed for safe folding- Even when there are no tools, the nut can be refastened using the hole on the side of the main body. (Excluding DASH)- Appl..
USD $12.89 USD $15.13
- Generic holder for general soldering iron up to 100W- Use with the Hakko N452/N453/N454 (DASH), 918/920/921/922 (MACH-I), 455, 456, 503/508, 905/910/915 (PORTABLE)..
USD $30.07 USD $34.04
- Hakko iron holders are made with temperature resistant materials and feature a non-skid base. - This holder can hold many different soldering stick irons...
USD $81.01 USD $83.21
- A low cost, high-performance tool for reforming IC and LSI leads.- Speed IC and LSI insertion- No more broken leads during IC and LSI insertion or transportation.- Simply insert the IC case into the Dipliner chute, and the leads are protected right through circuit board insertion.- Adjustable leads former fits all types, sizes and marks of ICs an..
USD $92.28 USD $98.34
- A low cost, high-performance tool for reforming IC and LSI leads.- Speed IC and LSI insertion- No more broken leads during IC and LSI insertion or transportation.- Simply insert the IC case into the Dipliner chute, and the leads are protected right through circuit board insertion.- Adjustable leads former fits all types, sizes and marks of ICs an..
USD $92.52 USD $98.34
- A low cost, high-performance tool for reforming IC and LSI leads.- Speed IC and LSI insertion- No more broken leads during IC and LSI insertion or transportation.- Simply insert the IC case into the Dipliner chute, and the leads are protected right through circuit board insertion.- Adjustable leads former fits all types, sizes and marks of ICs an..
USD $94.77 USD $101.36
- A low cost, high-performance tool for reforming IC and LSI leads.- Speed IC and LSI insertion- No more broken leads during IC and LSI insertion or transportation.- Simply insert the IC case into the Dipliner chute, and the leads are protected right through circuit board insertion.- Adjustable leads former fits all types, sizes and marks of ICs an..
USD $92.00 USD $98.34
- C5030 Maintenance Kit Includes:: B1087 - 1.0mm Cleaning Pin, B1215 - Heater Cleaning Pin, B1303 - 1.0mm Cleaning Drill, B5106 - Nozzle Wrench, A5020 - Station Filter (x2), A5044 - Handpiece Filter (x4)..
USD $101.10 USD $113.46
- The Hakko C1390C Omnivise holds boards easily, safely, and securely. The unique design allows 360° use and can adjust to five different height settings. Can accommodate any board size.- The Omnivise was designed to hold printed circuit boards level while reworking them, but it can adapt easily to anything in the horizontal plane.- Adjustable heig..
USD $1,195.45 USD $1,285.93
- The Hakko C1392B rework fixture is designed for use with the Hakko 850, 852, 702, FR-801, FR-802, FR-803, FR-803B, FR-810 and FR-810B hot air rework systems. It can be used alone or together with the Hakko 853 preheater and C1390 Omnivise board holders.- Smooth lever action- Adjustable stop to prevent unnecessary pressure applied to the board and..
USD $454.92 USD $491.68
- The new Hakko FR-830 is a compact and low cost solution to preheating printed circuit boards. The FR-830 incorporates the same higher performance and FR-803B integration feature as the FR-820 but with improved durability over all previous Hakko hot air preheaters.- The integrated self-resetting overheat protection, high pressure fan, and convex o..
USD $299.49 USD $317.70
- Handpiece assembly for the FR-811 Advanced SMD Hot Air Rework System. A5006 (Heater) is not included...
USD $161.75 USD $177.76
- High-performance, long-life heater: Adopts ceramic insulators that have excellent heat storage properties and can heat efficiently.- Easy heater replacement: By adopting a cartridge-type heater, the heater can be replaced just by removing the screw on the protection pipe.- Safety design that makes it difficult to tip over even when working indepe..
USD $60.66 USD $68.08
- The Hakko FS-210 refillable flux pen allows for the controlled application of liquid flux. It is compatible with a wide variety of fluxes, including no-clean, water soluble, rosin and strong acids.- The fine point nylon tip gives the operator precise application of the flux to the soldering area. Simply squeeze the pen grip for controlled applica..