Category Features

Test Instruments

Grid View:
Quickview

[Daekyung Tech]Custom Brinell Tester_Automotive engine block test, hydraulic system, large sample measurement_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech]Custom Brinell TesteQuote Contact_cs@roasexpo.comLarge and heavy products such as automotive parts are difficult to measure Brinell tests due to movement restrictions.That's why it's specially made to order.After placing the sample on the roller and moving it into the testing machine, place the sample on the test bench with a hydraul..

Quickview

[Daekyung Tech] Brinell hardness tester (DTB-600N)_ One-touch, automatic load removal, hydraulic type Brinell hardness tester_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Brinell hardness tester (DTB-600N)Quote Contact_cs@roasexpo.comIt is a hydraulic Brinell hardness tester that tests by pressing the indenter of a steel ball into a specimen under a constant test load.-Main functions and featuresㆍEasy to operate with one touch until the test is completed.ㆍLoad maintenance and load removal are automat..

Quickview

[Daekyung Tech] Brinell hardness tester (DTB-500)_hydraulic hardness tester, high-precision entry-level type, hardness test of metal materials_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Brinell hardness tester (DTB-500)Quote Contact_cs@roasexpo.comIt is a hydraulic Brinell hardness tester that tests by pressing the indenter of a steel ball into a specimen under a constant test load.Main functions and features- When the load is maintained, the load drop phenomenon hardly occurs.- It is a high-precision entry-level m..

Quickview

[Daekyung Tech] Rockwell hardness tester (DTR-300N)_ Maintain high accuracy, test function based on ISO regulations, maintain high accuracy_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Rockwell hardness tester (DTR-300N)Quote Contact_cs@roasexpo.com-Main functions and featuresIt is widely used for soft and hard metals, non-ferrous metals, and non-metals.It is an easy-to-operate and high-precision testing machine that can perform quick tests.The traces of the test are fine, so the processing of the test piece by ap..

Quickview

[Daekyung Tech] Rockwell hardness tester (DTR-200N)_Precise holding time control, easy lever, wide range of measurement_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Rockwell hardness tester (DTR-200N)Quote Contact_cs@roasexpo.comIt is a tester used to measure Rockwell hardness values ​​such as HRC and HRB.-main function1.There is no individual error when measuring with an automatic motor driving method.2. During the test, the indicator lamp lights up, and the test operation is simple and does n..

Quickview

[Daekyung Tech] Drop impact tester_damage test, acceleration test, measurement possible_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Drop impact testerQuote inquiry_ CS@roasexpo.comIt is a drop impact tester that can test the impact that may occur while moving the refrigerator and whether the product is damaged as a result.Manufactured to customer specifications.If you have an idea you want to test, Daekyung Tech Co., Ltd. can produce it...

Quickview

[Daekyung Tech] DuPont Impact Tester_Sample Inspection, Drop Height Manually, Paint, Film, and Painted Sample Use_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] DuPont Impact TesterQuote inquiry_ CS@roasexpo.comThis is a small drop impact tester that tests samples by dropping weights of different weights.In general, samples with paints, films, and coatings applied to metal plates are used.The drop height can be manually set, and the maximum drop height is 500 mm...

Quickview

[Daekyung Tech] Charpy Impact Tester-Small_ Manual, Data Dial Gauge Provided, Metallic Material Impact Test_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Charpy Impact Tester-SmallQuote inquiry_ CS@roasexpo.comASTM E23ASTM D256ISO 179It is a low-capacity Charpy impact tester.The weight is manually raised and the data is read directly from the dial gauge.specificationCapacity: 3J, 6J, 15JMaximum tensile angle: 120 degreesWeight of weight: 2.44 kgInternational Standard: ASTM E23, D256,..

Quickview

[Daekyung Tech] Izod impact tester_small impact tester, automatic calculation, digital type_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Izod impact testerQuote inquiry_ CS@roasexpo.comASTM E23ASTM D256ISO179conforms toIt is a digital type Izod small impact tester.The angle of the weight and the impact energy value after the test are automatically calculated and displayed.specificationCapacity: 3J, 6J, 15JMaximum tensile angle: 120 degreesWeight of weight: 2.44 kgSiz..

Quickview

[Daekyung Tech] Izod impact tester_non-metal material tester, sample measuring instrument, impact energy measurement_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Izod impact testerQuote inquiry_ CS@roasexpo.comASTM E23ASTM D256ISO179It meets the specifications.The Izod impact tester is generally used to measure the impact energy of non-metallic samples.specificationCapacity: 3J, 6J, 15JMaximum tensile angle: 120 degreesWeight of weight: 2.44 kgSize: 560 x 400 x 450 mmTotal weight: about 50 k..

Quickview

[Daekyung Tech] Charpy Impact Tester_Provide a program dedicated to the latest specifications, ground and horizontal test, metal material test__ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Charpy Impact TesterQuote inquiry_ CS@roasexpo.comASTM E23ASTM A370ASTM D6110It is a Charpy impact tester that conforms toImpact testers for standard specimens are largely divided into Charpy and Izod methods.Whereas Charpy places the sample horizontally on the ground and tests, Izod installs the sample vertically.Since an important..

Quickview

[Daekyung Tech] Spring tester 30 kN_ spring constant tester, dedicated program provided, tensile/extrusion test possible_ Made inn KOREA

Ship from South Korea
(0)

[Daekyung Tech] Spring tester 30 kNQuote Contact_CS@roasexpo.comIt is a spring tester of up to 30 kN.It has a normal UTM frame, but it has been modified to fit the spring test.Due to the nature of the high-load spring, if a single load cell is used, it is easily damaged due to the influence of the eccentric load.Daekyung Tech's products are designe..

Quickview

[Daekyung Tech] Spring tester 5kN_ spring constant K, touch screen, tensile, compression direction test_ Made inn KOREA

Ship from South Korea
(0)

[Daekyung Tech] Spring tester 5kNQuote Contact_CS@roasexpo.comThis equipment is used to find the spring constant K of a general coil spring.It is designed to be tested in both tensile and compressive directions.You can run the test simply by using the touch screen.The free height of the spring can be measured automatically at the start of the test...

Quickview

[Daekyung Tech] Coil spring tester_ Deflection angle measurement, spring test, railway coil spring test_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Coil spring testerQuote Contact_CS@roasexpo.comThis is a testing machine for testing the coil spring used in the high-speed train KTX.Since the springs used in railway use two springs overlapping each other, it is necessary to check the deflection angles of the inner and outer springs and combine them in opposite directions.Daekyung..

Quickview

[Daekyung Tech] Ring crush compression tester_corrugated cardboard compressive strength test, industrial measuring instrument, deformation/displacement measurement_Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Ring crush compression testerQuote Contact_CS@roasexpo.comThis equipment tests the compressive strength of corrugated cardboard.The test is conducted under the conditions of RCT/ECT/FCT/FAT/CMT/CCT.The maximum load is 5,000 N and the test speed is up to 50 mm/min.Depending on the test method, various pressing jigs are used...

Quickview

[Daekyung Tech] Box compression strength tester_ Compressive strength test for packaging containers, machine/jig production, various size tests available_Made in KOREA

Ship from South Korea
(0)

 [Daekyung Tech] Box compression strength testerQuote Contact_CS@roasexpo.comBox compressive strength testerThis is a testing machine that tests the compressive strength of boxes, pallets, and packaging containers.It is usually used to figure out how many layers can be stacked when stacking products.We manufacture machines and jigs in various ..

Quickview

[Daekyung Tech] Earthquake generation tester_ material resistance, fatigue recovery, deformation characteristics judgment, research/development_ Made in KOREA

Ship from South Korea
(0)

 [Daekyung Tech] Earthquake generation testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of judging or researching and developing the resistance,fatigue recovery, and deformation characteristics of materials by applying pressure and seismic waves to various materials with hydraulic force...

Quickview

[Daekyung Tech] Motor type bending Wdaring Tester_resistance, fatigue recovery, deformation characteristics determination, research/development purpose_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Motor type bending Wdaring TesterQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of researching and developing the resistance,fatigue recovery, and deformation characteristics of materials by applying fatigue to various materials with the power of the motor...

Quickview

[Daekyung Tech] Car body buckling tester_ resistance, fatigue recovery, deformation characteristics determination, research/development purpose_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Car body buckling testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of researching and developing the resistance,fatigue recovery, and deformation characteristics of materials by applying pressure and seismic waves with hydraulic force to various materials...

Quickview

[Daekyung Tech] High-strength pipe bending fatigue tester_ resistance, fatigue recovery, determination of deformation characteristics, research/development purpose_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] High-strength pipe bending fatigue testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of researching and developing the resistance,fatigue recovery, and deformation characteristics of materials by applying pressure and seismic waves with hydraulic force to various materials...

Quickview

[Daekyung Tech] 1/4 Car Hydrauilc Exciter_ static drag, fatigue recovery, determination of deformation characteristics, research/development purpose_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] 1/4 Car Hydrauilc ExciterQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of research and development or to judge material resistance,fatigue recovery, and deformation characteristics by applying pressure and vibration wavelength to the 1/4 car with hydraulic power...

Quickview

[Daekyung Tech] Horizontal tensile fatigue tester_resistance, fatigue recovery, determination of deformation characteristics, research/development purpose_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Horizontal tensile fatigue testerQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of research and development or judging the resistance, fatigue recovery,and deformation characteristics of materials by applying hydraulic force to various materials...

Quickview

[Daekyung Tech] 30MN bridge elastic bearing and LRB composite tester_LRB performance test, displacement control/load control fatigue test_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] 30MN bridge elastic bearing and LRB composite testerQuote Contact_CS@roasexpo.comIt is a composite structure tester that can test the performance of elastic bearings for bridges,vibration-proof rubber, and LRB for construction...

Quickview

[Daekyung Tech] Vibration tester (hydraulic servo control type)_ resistance, fatigue recovery, determination of deformation characteristics, research/development purpose_ Made in KOREA

Ship from South Korea
(0)

[Daekyung Tech] Vibration tester (hydraulic servo control type)Quote Contact_CS@roasexpo.comThe hydraulic exciter is an excitation for modal testing of parts and equipment,and it is a testing machine that can perform vibration fatigue of parts and equipment.Since high-frequency motion is required rather than low-frequency motion due to the characte..

Quickview

[Daekyung Tech] Actuator for structural testing_ resistance, fatigue recovery, fatigue judgment, research/development purpose_ Made in KOREA

Ship from South Korea
(0)

 [Daekyung Tech] Actuator for structural testingQuote Contact_CS@roasexpo.comIt is manufactured for the purpose of judging or researching and developing material resistance,fatigue recovery, and fatigue failure by repeatedly pressing the structure with hydraulic force...

Showing 176 to 200 of 215 (9 Pages)