Search

- Pre-heating effect: A pre-heating effect can be obtained by nitrogen gas passing through the soldering iron heater, and soldering can be done without raising the temperature of the iron tip even in lead-free soldering with a high melting point on high-density boards and multi-layer boards such as parts vulnerable to heat.- Improved melt spreadabi..

- The nitrogen gas generated is extremely high-performance with a maximum concentration of 99.9%.- Compact and space saving. It can also be used lying down regardless of direction.- External dimensions: 73(W) x280(H) x 66(D)mm..

- The nitrogen gas generated is high-performance and large-capacity with a maximum concentration of 99.9%.- Nitrogen gas can be supplied only with an air compressor, so no power source is needed, and two soldering irons can be used...

- Pre-heating effect: A pre-heating effect can be obtained by nitrogen gas passing through the soldering iron heater, and soldering can be done without raising the temperature of the iron tip even in lead-free soldering with a high melting point on high-density boards and multi-layer boards such as parts vulnerable to heat.- Improved melt spreadabi..

..

..

..

..

- It is a wireless type and is convenient to carry, so you can use it anytime, anywhere, regardless of where you work.- Changing the soldering iron tip is simple.- The battery case is a cartridge type, so various batteries such as alkaline, nickel, and hydrogen can be used.- It is widely used not only for hobbies such as models and radio controls, ..

- Nitrogen gas passes between the nozzle set and the iron tip and surrounds the entire iron tip, blocking oxygen. This prevents oxidation of the iron tip and lead, increases the preheating effect, and achieves reliable soldering.- Lightweight grip that reduces fingertip fatigue even when working for long periods of time..

..

Highest specifications model with only the best specifications of SMD- Data up/down possible through USB port, various conditions can be set by linking with PC.- Profile creation is possible under near real-time conditions.- Includes C5037 preheater, includes FR-811 BGA SMD rework station, includes C5027 BOARD HOLDER, includes C5029 GRIP FIXTURE "L..

- Suitable for chip component repair, and the air volume switching switch allows work to be done with very fine wind.- Composition: main body, soldering iron, nozzle (inner diameter 02mm: No.A1066), soldering iron holder (B1190), nozzle holder (B1212)..

Soldering as well as solder removal and SMD REWORK are possible with the latest multi-function stataion.- Combining 3 soldering irons, FX-889 soldering iron, FR-410 soldering iron, and hot air F-810B into one unit. One soldering iron of L type FX-8805 is attached.- Toolbox provided C5030: FH410-81 for cleaning pin nozzle Ø1.0mm, cleaning pin heater..

Multi-function in one product (soldering, desoldering, SMD rework)- Compatible with various soldering irons. Adoption of large LCD panel. Graphic LCD Play- Simple operation method. N2 system compatible products- Detailed work possible by direct heat application- FR-206 main body, power plug, tip holder, FM-2027 set, FM-2024 set, FM-2029 set..

Simple profile work is possible with the preset linkage function.- You can easily set the pre-registered temperature setting. (Available for up to 5 units) Efficiency can be increased by saving work time.- Equipped with a vacuum pick-up function as standard, increasing work time and efficiency.- Safety: Reinforced safety features by incorporating a..

- This is a high-specification product with excellent price-performance ratio and allows rework using hot air.- Equipped with a profile function that allows work in conditions close to reflow- A control panel that allows you to set even complex settings intuitively, allowing you to connect to a PC and measure, record, and modify the temperature of ..

-  C5016 하단 히터는 FR-811에 저장 되는 사용자 프로그래밍 가능 재작업 프로 파일의 실행으로 HAKKO FR-811 SMD 열풍 재작업 시스템에 의해 통합 되고 완전히 제어 됩니다.- 본 히터는 어셈블리의 램프 속도를 모니터링/제어 하는 기능을 포함 하 여 전력 또는 열전대 모드에서 작동 할 수 있습니다.- 참고: HAKKO C5016는 FR-811와 함께 사용 해야 합니다. 독자적으로 작동하지 않습니다...

- Select the heat supply pattern according to the type of lead: can be used in optimal conditions by setting parameters- You can select four patterns of heat supply settings: Sn-Pb (tin - lead), Sn-Ag-Cu (tin, silver, copper), Sn-Cu (tin, copper), and Sn (tin).- Accurate temperature management is possible: digital display allows setting in 1℃ incre..

- Optimized for dipping work on small parts- Lead tank (50), 100~450 degrees Celsius..

- Optimized for dipping work on small parts- Lead tank (70), 100~380 degrees Celsius..

- Components: FX-305 main body, B5322 lead tank cover, B2919 oxide collection stand, B2932 spatula, B1416 hex wrench (2mm), B2419 power cord, B5129 USB communication cable- High output reduces work preparation time by 60%. Temperature compensation function and maximum temperature of 530 degrees allow work on high-temperature, high-heat products (50..

..

- It is a size that fits easily in one hand and was created for micro soldering under a microscope. Weight 14g, body Ø11.6, size 133.5mm (length)- Easy to separate/attach GRIP mark. Attach the GRIP mark for lead-free soldering or remove process soldering.- This conversion kit includes the sleek micro soldering iron, iron holder with sponge, heat re..

- Increases workability in mounting fine, high-density electronic components.- Ideal for micro soldering work under a microscope - Ultra-light type (weight 14g - when attached to a 1D soldering iron tip)- Compatible soldering iron stations: (FX-951, FX-952, FM-203, FM-206)..