YF SERIES uses relatively high torque and a product with a torque accuracy of ±3%, and uses a Swiss “MAXON” BRUSHLESS MOTOR (BLDC) and an ESD type case that can prevent static electricity.- Long lifespan due to use as a BLDC MOTOR (no CARBON BRUSH)- Speed, angle, automatic reverse program function, 300-1700 RPM, motor efficiency 85%- Less noise and..

- The auto range function allows measurement of AC/DC voltage, diode, resistance, continuity, condenser, frequency, transistor, etc. It also has an auto power off function, making it economical as it consumes less batteries.- Made in KOREA..

- LCD backlight function, Low Battery display function, Display Hold feature (The LCD's backlight is blue and can be seen even in the dark.)- 9V (alkaline / NiCd) battery power..

- The auto range function allows measurement of AC/DC voltage, diode, resistance, continuity, condenser, frequency, transistor, etc. It also has an auto power off function, making it economical as it consumes less batteries.- Made in KOREA..

..

- This is a product that plugs directly into an outlet to determine the presence or absence of grounding. It is used to find the presence or absence of LIVE (HOT) current incoming lines and grounding lines.-Size: 80x40x40..

- This is a portable and lightweight product that can measure AC 100V to 25,000V.- It eliminates the existing detector selection S/W and can measure low and high voltages with just one S/W. It is suitable for detection of electricity in distribution lines and internal converters.Working voltage rangeLow Voltage: AC 100~600VChigh Pressure: AC3,000~2..

- This is a portable and lightweight product that can measure AC 100V to 25,000V.- It eliminates the existing detector selection S/W and can measure low and high voltages with just one S/W. It is suitable for detection of electricity in distribution lines and internal converters.Working voltage rangeLow Voltage: AC 100~600VChigh Pressure: AC3,000~2..

- Easy to carry as it is a rod type.- Acoustic luminescence is very advantageous in noisy or dark places.- Power: 9V x 1ea..

- Easy to carry as it is a rod type.- Acoustic luminescence is very advantageous in noisy or dark places.- Power: 9V x 1ea..

- Accuracy ±0.5% (20% to 100% of maximum measured value)- Accuracy ±1% (10% to 20% of maximum measured value)- For measuring manual electric drivers, torque wrenches and air drivers (excluding impact wrenches)- Select TRACK, PEAK, FIRST PEAK- Select a total of 7 torque units (OZF·IN, LBF·IN, LBF·FT, CN·M, N·M, KGF·M, KGF·CM)- Built-in QUICK TEST OP..

- SCOUT II is a screw counter that can be used in conjunction with each dedicated controller.- By setting the total count quantity and the quantity for each fastening part, OK/NG judgment is made for the fastening work, and the quantity of screws to be fastened in the future is displayed.- Up to 5 electric drivers share 1 program- OK/NG judgment fo..

- Test line voltage AC100 ~ 600V- Distance: Proximity (start of curb shadow)- Indication: Luminous red sound (50dB)- Test frequency: 50/60Hz- Insulation resistance: more than 100 megohms- Insulation voltage: Dong. award. AC2000V for 1 minute- Leakage current: 100чA or less during insulation voltage test- Operation start: AC75V The above operation s..

- Precision ± 0.5% (20% to 100% of reading FS)- Accuracy ± 1% (reading FS의 10% ~ 20%)- Built-in Transducer and easy operation- For measuring torque wrench and electric driver, air driver (excluding impact wrench)- Track, Peak Mode- Indicate in torque units Ibf.in, cN.m, N.m, kgf.cm.- Low-pass filter (3000, 1500, 1000 and 500Hz)- Rechargeable batter..

- Various data such as setting torque, tightening torque, number of revolutions, count, tightening time, etc. can be checked using a PC or DATA MANAGER. In addition, remote control and fastening data output are possible by linking with a PLC.- Models are divided into manual and automated models depending on the usage environment, and VACUUM can be ..

- Various data such as setting torque, tightening torque, number of revolutions, count, tightening time, etc. can be checked using a PC or DATA MANAGER. In addition, remote control and fastening data output are possible by linking with a PLC.- Models are divided into manual and automated models depending on the usage environment, and VACUUM can be ..

- Various data such as setting torque, tightening torque, number of revolutions, count, tightening time, etc. can be checked using a PC or DATA MANAGER. In addition, remote control and fastening data output are possible by linking with a PLC.- Models are divided into manual and automated models depending on the usage environment, and VACUUM can be ..

- Various data such as setting torque, tightening torque, number of revolutions, count, tightening time, etc. can be checked using a PC or DATA MANAGER. In addition, remote control and fastening data output are possible by linking with a PLC.- Models are divided into manual and automated models depending on the usage environment, and VACUUM can be ..

- Various data such as setting torque, tightening torque, number of revolutions, count, tightening time, etc. can be checked using a PC or DATA MANAGER. In addition, remote control and fastening data output are possible by linking with a PLC.- Models are divided into manual and automated models depending on the usage environment, and VACUUM can be ..

- Various data such as setting torque, tightening torque, number of revolutions, count, tightening time, etc. can be checked using a PC or DATA MANAGER. In addition, remote control and fastening data output are possible by linking with a PLC.- Models are divided into manual and automated models depending on the usage environment, and VACUUM can be ..