- Components: Main station (FN1010), stand (FH200), power cord, soldering iron stand (FH210-81), iron tip cleaner (FT401-81), cleaning wire (A1561), soldering iron (FN1101-81), instruction manual- IoL technology: Improvement of soldering technology corresponding to artificial intelligence, improved tracking, minimizing human errors, optimizing sold..

- Pre-heating effect: A pre-heating effect can be obtained by nitrogen gas passing through the soldering iron heater, and soldering can be done without raising the temperature of the iron tip even in lead-free soldering with a high melting point on high-density boards and multi-layer boards such as parts vulnerable to heat.- Improved melt spreadabi..

- The nitrogen gas generated is extremely high-performance with a maximum concentration of 99.9%.- Compact and space saving. It can also be used lying down regardless of direction.- External dimensions: 73(W) x280(H) x 66(D)mm..

- The nitrogen gas generated is high-performance and large-capacity with a maximum concentration of 99.9%.- Nitrogen gas can be supplied only with an air compressor, so no power source is needed, and two soldering irons can be used...

- Pre-heating effect: A pre-heating effect can be obtained by nitrogen gas passing through the soldering iron heater, and soldering can be done without raising the temperature of the iron tip even in lead-free soldering with a high melting point on high-density boards and multi-layer boards such as parts vulnerable to heat.- Improved melt spreadabi..

..

..

..

..

- Excellent thermal efficiency of the IH (high frequency induction heating) method: It is different from the resistance heating method, which controls the temperature by turning the heater on and off using a sensor. The IH heating method generates heat and maintains a certain temperature of the iron tip itself, so it can exert soldering power where..

- It is a wireless type and is convenient to carry, so you can use it anytime, anywhere, regardless of where you work.- Changing the soldering iron tip is simple.- The battery case is a cartridge type, so various batteries such as alkaline, nickel, and hydrogen can be used.- It is widely used not only for hobbies such as models and radio controls, ..

- Nitrogen gas passes between the nozzle set and the iron tip and surrounds the entire iron tip, blocking oxygen. This prevents oxidation of the iron tip and lead, increases the preheating effect, and achieves reliable soldering.- Lightweight grip that reduces fingertip fatigue even when working for long periods of time..

..

Hot Tweezer FX-8804 suitable for SMD rework of chip components and SOP components- By directly heating and removing only the soldered area of ​​the component to be removed by sandwiching it with tweezers, repair is possible with minimal thermal impact on surrounding components or the board.- FX-8804 can be used by connecting to FX-888D / 888DX / FX..

-  C5016 하단 히터는 FR-811에 저장 되는 사용자 프로그래밍 가능 재작업 프로 파일의 실행으로 HAKKO FR-811 SMD 열풍 재작업 시스템에 의해 통합 되고 완전히 제어 됩니다.- 본 히터는 어셈블리의 램프 속도를 모니터링/제어 하는 기능을 포함 하 여 전력 또는 열전대 모드에서 작동 할 수 있습니다.- 참고: HAKKO C5016는 FR-811와 함께 사용 해야 합니다. 독자적으로 작동하지 않습니다...

- It is a size that fits easily in one hand and was created for micro soldering under a microscope. Weight 14g, body Ø11.6, size 133.5mm (length)- Easy to separate/attach GRIP mark. Attach the GRIP mark for lead-free soldering or remove process soldering.- This conversion kit includes the sleek micro soldering iron, iron holder with sponge, heat re..

- Increases workability in mounting fine, high-density electronic components.- Ideal for micro soldering work under a microscope - Ultra-light type (weight 14g - when attached to a 1D soldering iron tip)- Compatible soldering iron stations: (FX-951, FX-952, FM-203, FM-206)..

..

..

..

- The Hakko C1390C Omnivise holds boards easily, safely, and securely. The unique design allows 360° use and can adjust to five different height settings. Can accommodate any board size.- The Omnivise was designed to hold printed circuit boards level while reworking them, but it can adapt easily to anything in the horizontal plane.- Adjustable heig..

- The new Hakko FR-830 is a compact and low cost solution to preheating printed circuit boards. The FR-830 incorporates the same higher performance and FR-803B integration feature as the FR-820 but with improved durability over all previous Hakko hot air preheaters.- The integrated self-resetting overheat protection, high pressure fan, and convex o..

- Handpiece assembly for the FR-811 Advanced SMD Hot Air Rework System. A5006 (Heater) is not included...

- High-performance, long-life heater: Adopts ceramic insulators that have excellent heat storage properties and can heat efficiently.- Easy heater replacement: By adopting a cartridge-type heater, the heater can be replaced just by removing the screw on the protection pipe.- Safety design that makes it difficult to tip over even when working indepe..

- The Hakko FS-210 refillable flux pen allows for the controlled application of liquid flux. It is compatible with a wide variety of fluxes, including no-clean, water soluble, rosin and strong acids.- The fine point nylon tip gives the operator precise application of the flux to the soldering area. Simply squeeze the pen grip for controlled applica..