-Supports energy saving for iron tip temperature management by omitting manual measurement temperature recording and PC input tasks.- Measurement ends when the “H” mark changes from blinking to lit. Automatically determines measurement errors and requests re-measurement. If the tip falls off the sensor before the measurement is finished, “Fail” is ..

- The temperature of the iron tip can be measured in any direction as the slide pin moves toward the terminal.- Temperature sensors 191-212 display a sensor burnout warning, so you can know when to replace them.- Measurement range: 0 ~ 700℃, measurement tolerance: ± 3℃ (range 300 ~ 600℃)- Composition: main body (including batteries), sensor, instru..

- Temperature measurement range: 0 ~ 700℃, measurement tolerance: ± 3℃ (range 300 ~ 600℃)- Voltage measurement range: 0~40mV (AC), measurement tolerance ± (5% of reading +1 digit)- Resistance measurement range: 0~40, measurement tolerance ± (5% of reading +1 digit)- Composition: main body, fuse, conductive wire, ground clip, power cord, sensor (10 ..

- Soldering Iron TIP, Slim Chisel, UHD3.2 x 8mm, ForFX-8002/8003 Ultra Heavy Duty (UHD) Soldering Station..

- Soldering Iron TIP, Slim Chisel, UHD 6 x 3.5mm., For FX-8002/8003 Ultra Heavy Duty (UHD) Soldering Station..

- 0.5mm Radius x 17mm Conical Tip shape B For the FX-650 Soldering Iron..

- 0.8mm/ 45° x 0.9mm x 17mm Bevel Tip, For the FX-650 Soldering Iron..

- 2mm/ 45° x 2mm x 17mm Bevel Tip, For the FX-650 Soldering Iron..

- 3mm/45° x 3mm x 17mm Bevel Tip, For the FX-650 Soldering Iron..

- 4mm/ 45° x 4mm x 17mm Bevel Tip, For the FX-650 Soldering Iron..

- 3.2MM x 0.5mm x 17mm Chisel Tip, For the FX-650 Soldering Iron..

- 0.2 Radius x 17mm Sharp Conical Tip, For the FX-650 Soldering Iron..

- FN-1010, FG-100B, FH-210, FN-1101- 모델: T36-B, T36-B2, T36-BC1, T36-BC2, T36-BC3, T36-BL, T36-C1, T36-C4, T36-D08, T36-D16, T36-D24, T36-D52, T36-DL32, T36-I, T36-ILS..

- 0.5mm Radius Conical. T19 Series Conical Tip, shape B, for use with the FX-601 and FX-8805..

- 1mm Radius Conical. T19 Series Conical Tip, shape 2B, for use with the FX-601 and FX-8805..

- 3mm /45° Bevel. T19 Series Bevel Tip, shape 3C, for use with the FX-601 and FX-8805..

- 4mm /45° Bevel. T19 Series Bevel Tip, shape 4C, for use with the FX-601 and FX-8805..

- 6.5mm/45° x 15.5mm Bevel. T19 Series Bevel Tip, shape 6.5C, for use with the FX-601 and FX-8805..

- 5mm Chisel. T19 Series Chisel Tip shape 5D For the FX-601 and FX-8805 soldering iron..

- 2.4mm Chisel. T19 Series Chisel Tip shape 2.4D For the FX-601 and FX-8805 soldering iron..

- 3.2MM Chisel. T19 Series Chisel Tip shape 3.2D For the FX-601 and FX-8805 soldering iron..

- 6.5mm Chisel. T19 Series Chisel Tip shape 6.5D For the FX-601 and FX-8805 soldering iron..

- TIP,MG,4mm DIA,583..

- TIP, MG, 6mm DIA, 585..

..