SAEHAN Controller for Electric Screwdriver HDC-35i, For HD-N-SERIES
SAEHAN_Tools
USD $0.00
- Brand:
- SAEHAN_Tools
- Product Code:
- SAEHAN_HDC-35i
- Availability:
- In Stock
Description
| Input voltage | AC120VC or AC220V, 50-60Hz, 2.5A |
| Output voltage | DC40V, 4A |
| Torque | 12 to 100 kgf.cm |
| Rotation speed (Speed) | 300-1,500 |
| Number of rotations (Turn) | 0.1 to 30 |
| Adjust torque offset value | -20% to +20% |
| Operating Environmental Conditions | -40℃ / 15–80% RH (without dew) |
| Input air pressure (bar) | minimum 4.5 bar / maximum 6 bar |
| Preset parameter | torque, rotational speed, and angle stored in 8 |
| How to select a setting address | - Front Panel button |
| Driver Information Recognition | Driver's EEP Rom enables automatic recognition and Calibration for individual characteristics |
| Display as error code | By dividing into errors for error information display systems, communication, and patterns Display as error code |
| Monitor screw fastening quality | monitor screw fastening time, turn count, etc Conclusion Quality OK/NG Judgment |
| Screw Counter | stores the number of screws for each of the eight models, Monitor normal engagement quantity |
| Set monitoring parameters | via PC communication software, Hi-Manager Monitoring engagement information and setting parameters (MS Windows base) |
HI-MANAGER
- You can check fastening data through RS232C communication and USB communication by connecting HDC-40I to a PC with the PC manager program.
- Error monitoring
- Screw counter monitoring
- Real-time monitoring
- Tuning torque, speed, number of turns, etc. on PC
0 reviews
There are no reviews for this product.