OMRON E32-D21 2M FIBER OPTIC SENSOR-ROAS MRO

Product Make-up

- E32-D21 2M consists of a fiber optic unit and a fiber optic amplifier.
- Includes light source and optical receiver, fiber amplifier amplifies and outputs the signal of the fiber optic unit
- In the form of fiber optic amplifier, compatible with E3NX-MA series.
- E3NX-MA series is a high-performance fiber optic amplifier with smart tuning function and eco mode function, 1:2 channels to save installation space, The sensor communication unit allows for various setting changes and reading of detection values

Product Characteristics

- The E32-D21 2M is a reflective, diffuse optical sensor, which uses a red 4 elemental light-emitting diode as the light source.
- The sensitivity of the fiber optic unit can detect fine objects less than 0.1mm, and the response time of the fiber amplifier can be selected between 100μs ~ 16ms
- It has Automatic Power Control (APC) function and Dynamic Power Control (DPC) function.
- The APC function automatically adjusts the output of the optical fiber unit's light source, preventing sensitivity degradation due to deformation or contamination of the optical fiber.
- The DPC function automatically adjusts the input of the optical receiver of the fiber optic unit, compensating for changes in output caused by deformation or contamination of the optical fiber
- It has a timer function and a hysteresis width setting function. The timer function allows you to adjust the operation time of the output, and you can select modes such as off-delay, on-delay, single-shot, on-off delay, etc.
- The hysteresis width setting function can adjust the difference between the output motion threshold and the return threshold, and you can choose standard settings or custom settings

Product Description

- E32-D21 2M has IP50 protection structure in accordance with IEC standards, and has protection circuits such as power back-access protection, output short-circuit protection, and output station connection protection.
- The ambient temperature range is -25°C~+55°C during operation, -30°C~+70°C during preservation, and the ambient humidity range is -25°C~+55°C during operation, and the ambient humidity range is · It is 35~85%RH at the time of preservation
- The mass of the body is about 75 g, the case and cover are made of polycarbonate (PC), and the cord is made of vinyl chloride (PVC).