HIOKI CLAMP ON PROBE 3273-50, High S/N characteristics enable the measurement of 10 mA order current waveforms, Wideband Current Probe for Oscilloscopes

HIOKI

3,113,782원 3,335,855원

0 reviews

Brand:: HIOKI
Product Code:: HIOKI_3273-50
Availability:: In Stock

Add to Cart

Description

The 3273-50 offers a wide DC to 50 MHz bandwidth and 30A of continuous input, and applications include capturing transient current signals from switching power supplies, inverters, and motor controllers.
- Waveform observation across a wide band from DC to 50 MHz
- Connects directly to oscilloscope or Memory HiCorder BNC input terminal
- High S/N characteristics enable the measurement of 10 mA order current waveforms (3273-50, 3276)

- Frequency bandwidth: DC to 50 MHz (-3 dB)

- Rise time: 7 ns or shorter

- Noise level: 2.5 mA rms max. (bandwidth limited to 20 MHz)

- Continuous allowable input : 30 A rms (requires derating at frequency)

- Max. allowable peak input: 50 A peak (non continuous)

- Amplitude accuracy (30 min. after power-on, after degaussing and zero-adjustment): ±1.0 % rdg. ±1 mV f.s. (DC, 45 to 66 Hz, 0 to 30 A rms) / ±2 % rdg. (DC, 45 to 66 Hz, 30 A rms to 50 A peak)

- Output rate: 0.1 V/A (The output of this probe is internally terminated)

- Measurable conductors: Insulated conductor

- Core diameter: φ 5 mm (0.20 in)

- Power supply: ±12 V ±0.5 V, 5.6 VA max.

- Dimensions and mass: Sensor: Approx. 175 mm (6.89 in.) W × 18 mm (0.71 in.) H × 40 mm (1.57 in.) D, 230 g (8.1 oz.) (excluding protrusions) / Sensor cable: 1.5 m (4.92 ft.), BNC terminal, Power cable: 1 m (3.28 ft.)

- Included accessories: Instruction manual ×1, Soft case × 1

0 reviews

There are no reviews for this product.